Quick question about backfiring.

mazdasp33d

Member
:
Mazdaspeed 3
my mod list consist of

full corksport exhaust
cpe nano and inlet
cobb ap running a v103 stage 2 + sf 93

my a/fs are like 14.7 or 8 at idle about 29 cruising and wot at 12 or 13
my fuel psi is around 430 at idle and over 1600 at wot

i havent hit boost over 21psi

i back fire time to time, and dont know if i shoot flames but is it because im too rich right? being lean is what causes engine problems correct?
 
my mod list consist of

full corksport exhaust
cpe nano and inlet
cobb ap running a v103 stage 2 + sf 93

my a/fs are like 14.7 or 8 at idle about 29 cruising and wot at 12 or 13
my fuel psi is around 430 at idle and over 1600 at wot

i havent hit boost over 21psi

i back fire time to time, and dont know if i shoot flames but is it because im too rich right? being lean is what causes engine problems correct?

8 at idle seems like super rich to me, 13 is a little lean for these engines at WOT.

Assuming you have the stock BPV because it wasn't in your mods list, I would check all of your hoses.
 
my mod list consist of

full corksport exhaust
cpe nano and inlet
cobb ap running a v103 stage 2 + sf 93

my a/fs are like 14.7 or 8 at idle about 29 cruising and wot at 12 or 13
my fuel psi is around 430 at idle and over 1600 at wot

i havent hit boost over 21psi

i back fire time to time, and dont know if i shoot flames but is it because im too rich right? being lean is what causes engine problems correct?

could be the Nano intake...there are a few people experiencing issues with it when running OTS cobb maps...
 
8 at idle seems like super rich to me, 13 is a little lean for these engines at WOT.

Assuming you have the stock BPV because it wasn't in your mods list, I would check all of your hoses.

so even if it reaches 14.8 at idle it super rich? and what numbers should i see at WOT
 

New Threads and Articles

Back