tenzo cuzco titanium bronze

[scatt nasty]

Whatever you have to tell yourself at night.

I don't have to tell myself s*** rofl. I'll be fully bolted with meth once my manifold gets here, and my car doesn't look like rosie odonell spread eagle.

 

[ericrapp]

Ha, you guys are getting personal. I also am able to get to sleep well Scatt N.

 

[ericrapp]

the drop

I run the exact same setup but with H&R's, not one rubbing problem yet and I love the look.

Are the H & R springs a bit more aggresive rates and lower than my Cobbs?

 

[Wastegate13]

I don't have to tell myself s*** rofl. I'll be fully bolted with meth once my manifold gets here, and my car doesn't look like rosie odonell spread eagle.

Aww, then you can have fun running 13's sweetheart.

Notice you are the one getting upset because someone called your wheels cheap. I don't give a s*** what you think about my car or the way it looks. I didn't buy it to appease you.

PS: I was driving an 11 second car when you were still thinking about dropping out of high school, which you apparently did based on your spelling and grammatical errors.

PPS: It was a 14.2 dick.

 

[ericrapp]

wastegate you should maybe think about opinions and manners and courtesy. i also have driven faster cars, thought about dropping out of high school and such. There is no need to criticize tastes. or performance scatt. Oh and my car IS faster than either of you jk heeehee.

 

[Wastegate13]

wastegate you should maybe think about opinions and manners and courtesy. i also have driven faster cars, thought about dropping out of high school and such. There is no need to criticize tastes. or performance scatt. Oh and my car IS faster than either of you jk heeehee.

I should watch my manners? His first post in this thread wasn't even about the OP's question, it was calling me "******* stupid" because I chose to spend my money on wheels instead of making "teh fa5te5t MS3 evAr" like he wants to do.

 

[ericrapp]

I stand corrected sir. we all should.

 

[scatt nasty]

to summarize it up. Wastegate bought his wheels cause the thinks they look cool, yet has no other exterior mods. I think they belong on a bean mobile in downtown LA. He thinks my wheels are cheap. No sweat off my sack.

Wastegate you have got to be shitting me !?!? You're telling me this car is SLOW ??? OMG!!111 I SPENT ALL THIS MONEY AND IM NOT FAST !!!
Im parting out tomorrow. And btw you can have first dibs on my power mods since you're lacking, I'll cut you a deal.


-BTW the OP obviously wants some Tenzo's but youre being a big douchebag and telling him the rims he wants are cheap. Your rims look like dog s***, but I guess that doesn't matter since they were lots of $$$

 

[Wastegate13]

to summarize it up. Wastegate bought his wheels cause the thinks they look cool, yet has no other exterior mods. I think they belong on a bean mobile in downtown LA. He thinks my wheels are cheap. No sweat off my sack.

Wastegate you have got to be shitting me !?!? You're telling me this car is SLOW ??? OMG!!111 I SPENT ALL THIS MONEY AND IM NOT FAST !!!
Im parting out tomorrow. And btw you can have first dibs on my power mods since you're lacking, I'll cut you a deal.


-BTW the OP obviously wants some Tenzo's but youre being a big douchebag and telling him the rims he wants are cheap. Your rims look like dog s***, but I guess that doesn't matter since they were lots of $$$

No, I answered his question. He wanted to know whether the difference in offset would equate to a difference in the concavity of the wheel face. I explained that with cheaper wheel companies instead of having multiple molds for different offsets they just add or subtract material from the mounting surface.

Again I didn't know I was supposed to mod my car to your tastes so please tell me what else I should do to it so that it will meet your approval.

 

[br289165]

What wheels are you on.

Tenzo's are cheap. The only thing Tenzo has going for it is at least their designs are somewhat original and not just blatant ripoffs of other companies like Rota.

 

[Wastegate13]

What wheels are you on.

Currently on BBS LM. That could change though. Next set will either be CCW Classics or some mag blue te37's. Or maybe I should just buy some Tenzos so scatt will stop picking on me.

 

[scatt nasty]

If I thought BBS wheels were THAT cool I would go find my nearest STOCK 2008 Toyota Camry and put that b**** on logs.

Go with the 37's.

 

[Wastegate13]

If I thought BBS wheels were THAT cool I would go find my nearest STOCK 2008 Toyota Camry and put that b**** on logs.

Go with the 37's.

Well they would be an improvement. (wedge)

 

[br289165]

BBS's are way played out and overpriced guy

Currently on BBS LM. That could change though. Next set will either be CCW Classics or some mag blue te37's. Or maybe I should just buy some Tenzos so scatt will stop picking on me.

 

[Wastegate13]

BBS's are way played out and overpriced guy

You are completely right. I'm going to take them off and burn them right now.

The day that forged 2 piece wheels go out of style is the day I stop toying with cars.

PS: why is it that the people who own cheap wheels and admit it get all defensive when someone calls them cheap?

 

[xSP33Dx3x]

BBS's are way played out and overpriced guy

(uhm)

 

[RelliMS3]

No, I answered his question. He wanted to know whether the difference in offset would equate to a difference in the concavity of the wheel face. I explained that with cheaper wheel companies instead of having multiple molds for different offsets they just add or subtract material from the mounting surface.

Again I didn't know I was supposed to mod my car to your tastes so please tell me what else I should do to it so that it will meet your approval.

I'm sure that some cheap wheel companies use that method but, I think Tenzo actually has different molds. The concavity of my +45 wheels look pretty different from the shape of the sample picture they use on their website which appears to be of a much lower offset. But then again, I don't have any other information about this than my own rim experience.

 

[Wastegate13]

I'm sure that some cheap wheel companies use that method but, I think Tenzo actually has different molds. The concavity of my +45 wheels look pretty different from the shape of the sample picture they use on their website which appears to be of a much lower offset. But then again, I don't have any other information about this than my own rim experience.

The wheels pictured on the site are more than likely wider than your wheel.

 

[RelliMS3]

The wheels pictured on the site are more than likely wider than your wheel.

Its hard to tell but, they do look close to an 8 inch wide wheel... that is interesting though about the different (or lack of) molds for different offsets

 

[Wastegate13]

Its hard to tell but, they do look close to an 8 inch wide wheel... that is interesting though about the different (or lack of) molds for different offsets

If you can tell the difference in a stock photo between a half inch then your eyes are far more calibrated than mine.

Many wheels companies simply add or subtract material from the hub mounting surface to change offset with the same width wheel. A change of 8mm in the offset would hardly necessitate an entirely new mold. This holds even more true for companies with smaller profit margins, aka cheaper wheel companies.