What have you done to your MSP today?

I don't need the extra diameter. I don't plan on upgrading any of the rest of the exhaust (unless terbow's DP goes through), so it would be a waste for me. By the time I'm doing that I'll want a full turbo back and a tune anyhow, so this piece would be superflous.

What is your objection to the flex pipe?
 
Last edited:
yeah I hear ya there... I may have to jump on his GB to if I cant figure this damn thing out... it's frustrating, but Ive only been able to put 30 min every few days in it... and ive screwed up several times...
 
GiJoe said:
yeah I hear ya there... I may have to jump on his GB to if I cant figure this damn thing out... it's frustrating, but Ive only been able to put 30 min every few days in it... and ive screwed up several times...
Click to expand...
it'll save you a lot of headache.. and probably money in the end... at least if you consider your time to be worth anything. haha
 
Im going to occ this weekend then ill be sending my parts off so something will happen in the near future.
 
Wagonbacker9 said:
My understanding was that something would probably be ready for production about a month from now... assuming all went smoothly.
Click to expand...

As i said in the thread i have to send my parts after occ then its kinda out of my hands but they will build a proto, i try it, if it doesnt require revision then they can start production. I cant fortell if something will need to be revised or not since they dont have a MSP there. Its a dead platform so its not like all these local and popular places are willing to take the time to make parts. You have my word that i will get them out asap, as long as it meets my quality standards. I would say a month is a bit too soon but this is my first venture into mass production of a car part so im chugging along as soon as i can. all the local places want a ton of money for the parts cause were making so little (in respect to the popular cars)
 
Fair enough. I'm not trying to push... So far as I'm concearned, on this platform, it happens when it happens. lol. whether is production of a part, or snapping a diff. You just gotta accept it.
 
Wagonbacker9 said:
Fair enough. I'm not trying to push... So far as I'm concearned, on this platform, it happens when it happens. lol. whether is production of a part, or snapping a diff. You just gotta accept it.
Click to expand...

Quit mentioning the diff... I'm at 70k with the stock diff and would like to keep it that way... knock on wood... until I got the money to weld it. lol.
 
I'm going to feel AWFUL if his goes in the next 5 K now.... lol. Actually thats a lie.. I'm going to laugh and officially decide that the MSPs of various colors are all collaborating to screw us in the same ways at the similar times... like how the spicy's seem to get into horrific accidents... the titaniums are going to be blowing diffs at the same mileages.
 
Wagonbacker9 said:
I'm going to feel AWFUL if his goes in the next 5 K now.... lol. Actually thats a lie.. I'm going to laugh and officially decide that the MSPs of various colors are all collaborating to screw us in the same ways at the similar times... like how the spicy's seem to get into horrific accidents... the titaniums are going to be blowing diffs at the same mileages.
Click to expand...

what are the black micas known for? I've heard nothing bad from them lol(thumb)
 
Wagonbacker9 said:
it'll save you a lot of headache.. and probably money in the end... at least if you consider your time to be worth anything. haha
Click to expand...

I work on it when I got nothin better to do at work, and I aint payin for any of the metal or equipmetn lol FREE STUFF ROCKS lol
 
Wagonbacker9 said:
Fair enough. I'm not trying to push... So far as I'm concearned, on this platform, it happens when it happens. lol. whether is production of a part, or snapping a diff. You just gotta accept it.
Click to expand...

I understand. I wish i coulda had it done already but this last place REALLY complicated things.
 
Please log in or register to reply here.

New Posts and Comments

J
Trying to run solar cable from roof into trunk without drilling
Replies
4
Views
153
Cooper1
C
C
CV Axle Brands
2
Replies
22
Views
269
TheMAN
T
L
A Purist’s Perspective - One Day with the 2024 Mazda CX-5 Signature Turbo
Replies
9
Views
204
jadmt
jadmt
W
Shock Upgrades For A 2024 CX-5 Carbon Turbo?
Replies
6
Views
154
TheMAN
T
N
2016~2023 CX-9 Brake pedal hissing noise
Replies
4
Views
4K
TheMAN
T
W
2024 CX-5 Turbo...Less Than Stellar MPG?
Replies
7
Views
165
Woodguru
W
View more…

New Threads and Articles

Back