What have you done to your MSP today?

[fatti03msp]

nothing special, spool front springs... if the CF splitter GB goes through that sould put me plenty low up front. haha. and either my back springs are sagging, or my sub box is just a lot heavier than I think, cuz its already damn near tucking the tire.

when i had subs it made my front look all funky too, but that CF splitter is pretty cool, almost makes me want to get the 03.5 lip and not get the DG

 

[Wagonbacker9]

I thought you were sellin Wagon?

I'm being realistic. If I get a GOOD offer on my car within like 4 months of listing it... I've hit the jackpot. Especially in this economy. I had a kid offering me $6500 and a blazer, but its not lookin like he can come through. So, I'm going to continue to do the mods I'd planned, and be ready to undo some of them in the event I start getting some real interest.

Basically all I have left for basic mods are to get a catless midpipe, and finish the FMIC setup (need a HKS flange, hot pipe, and couplers). Then maybe pick up an intake of some sort and get the crappy ass filter I've been using off there.

Then once funds accumulate, I'm intending to pick up a set of lowish offset 17 or 18 by 7.5 or 8" wide tires and get some fat rubber under the car... just gotta make sure they're universal bolt patter so they'll work on my next ride, and maybe my gf's in between.

thats my plan in a nutshell.

edit: the springs were also purchased almost 2 weeks ago. lol

 

[Wagonbacker9]

when i had subs it made my front look all funky too, but that CF splitter is pretty cool, almost makes me want to get the 03.5 lip and not get the DG

Call ken, I think he's still got a couple. lol the splitter should look NICE.

 

[fatti03msp]

Call ken, I think he's still got a couple. lol the splitter should look NICE.

i got rid of it, i went to an AutoX event last year and took it out, after that it never worked so i just sold it.

 

[Ricktalife]

and dam that sucks but least its working out for you.

Just got ok, finally getting an alignment after 3 weeks of changing to the BC coils. My aunt works for nissan so i get an alignment for 45 bucks and the maching is setup for the skyline so its lowered car friendly woot woot.

mmm skyline...

 

[Wagonbacker9]

i got rid of it, i went to an AutoX event last year and took it out, after that it never worked so i just sold it.

I meant the 03.5 lip. lol

 

[fatti03msp]

I meant the 03.5 lip. lol

o.. ya i saw that post. Im broke as a joke lol.

 

[Wagonbacker9]

yeah, being and MSP owner will do that to ya... lol

 

[GiJoe]

I'm being realistic. If I get a GOOD offer on my car within like 4 months of listing it... I've hit the jackpot. Especially in this economy. I had a kid offering me $6500 and a blazer, but its not lookin like he can come through. So, I'm going to continue to do the mods I'd planned, and be ready to undo some of them in the event I start getting some real interest.

I will give you 50 bucks and buy you a hooker for an hour...

Basically all I have left for basic mods are to get a catless midpipe, and finish the FMIC setup (need a HKS flange, hot pipe, and couplers). Then maybe pick up an intake of some sort and get the crappy ass filter I've been using off there.

I may be able to get one made for cheap what diamiter?


and I'll pick up your spliter if you do end up selling...

 

[GiJoe]

I meant the 03.5 lip. lol

I really need to pick one of those up...

 

[Wagonbacker9]

I will give you 50 bucks and buy you a hooker for an hour...



I may be able to get one made for cheap what diamiter?


and I'll pick up your spliter if you do end up selling...

I've got a gf better than any hooker, and I've already made 50 bucks today, but thanks anyway

2.5" is fine... including Jpipe and an O-2 bung. if you're building one, I may buy a cutout to get put in it... lol

if you want a splitter put a deposit in... $20... how can you go wrong?

 

[GiJoe]

I've got a gf better than any hooker, and I've already made 50 bucks today, but thanks anyway

2.5" is fine... including Jpipe and an O-2 bung. if you're building one, I may buy a cutout to get put in it... lol

if you want a splitter put a deposit in... $20... how can you go wrong?

well Idk about the Jpipe. I dont have a bender so I wouldnt be able to do that, but you can go to almost any muffler shop and get one bent for you. thats what I'm doing for my 3inch tb pipes, I'll just buy the strait pipes and weld flanges that I've already made for free at work on them...

and I cant afford to spend any extra monies right not, building the MSP is expensive... who woulda thunk it...

 

[Wagonbacker9]

I'll pay you if you cut me flanges fo the J pipe to S pipe, and for the mid to the B pipe... then I can custom my own pipe... are you cutting outa stanless or mild?

 

[GiJoe]

I'll pay you if you cut me flanges fo the J pipe to S pipe, and for the mid to the B pipe... then I can custom my own pipe... are you cutting outa stanless or mild?

stainless, thats all we had layin around the shop lol. let me get the exhaust off of the car and ill make them the same size. it's a 2.5 system right?

 

[Wagonbacker9]

if you can cut me stainless flanges that will bolt up in those 2 locations and accept a 2.5" pipe, I'll put in your splitter deposit. lol just go find yourself the 03.5 lip.

 

[GiJoe]

yeah I can cut em out for you. they'll be the same as the ones on the car now, the sort of rounded off diamond shape. but IDK if youll need the spring thingy on the pipes... thatll take me more time. I havent even thought about fabin those up yet... but I think they would be a good idea to put on there.

 

[dragtillidie]

My welded revised LSD should be done in a few hours!! Hopefully this one won't break!!

 

[Wagonbacker9]

yeah I can cut em out for you. they'll be the same as the ones on the car now, the sort of rounded off diamond shape. but IDK if youll need the spring thingy on the pipes... thatll take me more time. I havent even thought about fabin those up yet... but I think they would be a good idea to put on there.

I was planning on puttin in a flex pipe... so the stock flex joint wouldn't be necessary, as long as whatever you cut will seal against it.

whatever you work out just keep me posted... not huge rush.

 

[GiJoe]

I was planning on puttin in a flex pipe... so the stock flex joint wouldn't be necessary, as long as whatever you cut will seal against it.

whatever you work out just keep me posted... not huge rush.

yeah def man. it'll be a little bit though, I still gotta get the motor out of the car before I get the exhaust started. and IMO flex pipe= BAD! just sounds like a bad idea... but if it works why not... I might be able to do a 3" mide pipe if you want... I'll just have to figure out how to do make the diamiter larger...

 

[GiJoe]

My welded revised LSD should be done in a few hours!! Hopefully this one won't break!!

youve broke a welded LSD before?