GI: MSP Tubular Mani / Downpipe
- Thread starter terbow
- Start date
Outlawstar98
Member
- :
- 2003 MazdaSpeed Protege / 2013 BRZ
the price wont matter for me, just time timeframe, do you know about, ABOUT how long it will take till you can start accepting money to get these 3' DP's built, cause one of these days i gotta start making my exhaust LOL
and would a extra O2 hole be a option for more $?
and would a extra O2 hole be a option for more $?
Last edited:
Im definately having an option for a o2 bung, unless everyone just wants one included, itll raise the price a lil but its up to you guys.
i would say without dyno testing they should be ready within 1 month. they wont take long since i have one someones letting me use as a guide.
i would say without dyno testing they should be ready within 1 month. they wont take long since i have one someones letting me use as a guide.
Screw the dyno, if the 3" dp fits and has an O2 sensor bung I'll take one no questions asked. Any word on a one-off 3" midpipe?
Outlawstar98
Member
- :
- 2003 MazdaSpeed Protege / 2013 BRZ
i second that above, a 3" DP will make more HP no matter waht LOL, i just need one cause all my friends are getting exhausts b4 me! Im left out! LOL
But - the midpipe for me, cause im getting that fab'd up so i can drop a highflow cat in there durning emmisions.
But - the midpipe for me, cause im getting that fab'd up so i can drop a highflow cat in there durning emmisions.
yea i wasnt going to dyno the 3" cause i dont have an exhaust to fit it. I want to get these out asap. no word yet. i havent had time to talk with the shop
MSP Downpipe (1 piece) 3.0"
1. 2.0t03speed
2. Joka1
2. nvmsp (no terminal flange)
4. Outlawstar98
5. Junya1985
6. magnump5 (if full downpipe+midpipe)
7. DSTMSP03
8. Speed3.5 (4-bolt flange to turbo, 1 piece up to the flex section of Vibrant..
9. Deathspeed
10. racerx43269
11. Onequikmsp
12. Velicifero ( S+J no terminal flange)
13. Fatti03msp
14. 4g63et
15. i like speed
MSP Downpipe (1 piece) 2.5"
1. Gasological
2. Bala De Plata
3. GhostOne
4. nato
5. FLAMSP +midpipe
6.Racerx43269 ( w/ extra o2 bung, and like 4 inch flex tube? maybe? lol)
7. Badbandar
8.
9.
10.
MSP Direct replacement Tubular Mani List
1. GhostOne
2. JDM Sam
3. nato
4. Speed 3.5 (t3 flange w/ ext. wg & EGR pipe if possible)
5. racerx43269
6. Deathspeed (if external wg option)
7. Onequikmsp
8. dandan2
9. 4g63et
10.MSPlife
11.SleepyMSP
12. i like speed
13. Badbandar
14.MSP Kirk
1. 2.0t03speed
2. Joka1
2. nvmsp (no terminal flange)
4. Outlawstar98
5. Junya1985
6. magnump5 (if full downpipe+midpipe)
7. DSTMSP03
8. Speed3.5 (4-bolt flange to turbo, 1 piece up to the flex section of Vibrant..
9. Deathspeed
10. racerx43269
11. Onequikmsp
12. Velicifero ( S+J no terminal flange)
13. Fatti03msp
14. 4g63et
15. i like speed
MSP Downpipe (1 piece) 2.5"
1. Gasological
2. Bala De Plata
3. GhostOne
4. nato
5. FLAMSP +midpipe
6.Racerx43269 ( w/ extra o2 bung, and like 4 inch flex tube? maybe? lol)
7. Badbandar
8.
9.
10.
MSP Direct replacement Tubular Mani List
1. GhostOne
2. JDM Sam
3. nato
4. Speed 3.5 (t3 flange w/ ext. wg & EGR pipe if possible)
5. racerx43269
6. Deathspeed (if external wg option)
7. Onequikmsp
8. dandan2
9. 4g63et
10.MSPlife
11.SleepyMSP
12. i like speed
13. Badbandar
14.MSP Kirk
Yeah, that's the problem with 3" exhausts - it won't bolt up to most anything smaller. I just ask because I'd like to do all the exhaust work at the same time so I don't have to pull the turbo twice (once for manifold and then again for downpipe). Also, even if I do the exhaust mani and the downpipe at once I've have to get a custom midpipe made which would require me to drive somewhere open-downpipe first (not something I want to do!).
_MSprotegy
Member
- :
- 03 MSP & 06 MS6
put me down for a 3'' DownPipe
Outlawstar98
Member
- :
- 2003 MazdaSpeed Protege / 2013 BRZ
heres the question, where i would put my mani on at, could also install the downpipe.... how would the car run with just a downpipe and nothing else.
I know the Check Engine light should go on then, but would it run bad?
I know the Check Engine light should go on then, but would it run bad?
no word on the DP yet? (protest)
No i just sent the parts to them for modeling on monday. They have to model its space and then ill get some pics and price quotes. Give it time my son
It would run like a beast. It will have absolutely no restriction however it will be loud as hell. It will affect your tune, most likely lean it out cause there would be almost no back pressure so it will be flowin' like tupac. SO keep an eye on it.
Outlawstar98
Member
- :
- 2003 MazdaSpeed Protege / 2013 BRZ
well i would prob. just be driving it to a exhust shop for them to start working on the rest of it.
yea it would be fine like that. in fact it would be fun to drive, youll hear the turbo spool real loud too since theres nothing muffling the turbine sounds. just dont get caught by the fuzz. would be awful hard to talk your way out of that one lol
Velocifero
Wham Bam thank you Ma'am
- :
- VRM MS6, Sunlight Silver MSP
Just add an electronic dump to your pipes once you are finalizing. You won't regret it. I love it, open DP on demand!
indeed a goood idea. i always wanted one myself.
Velocifero
Wham Bam thank you Ma'am
- :
- VRM MS6, Sunlight Silver MSP
http://dmhperformance.com/
Absolutely no complaints from me and a couple years running. Great price, quality and customer service. I sold my second CS s-pipe and bought mine with that $. I love it.
