builthatch
Member
FS- Mazdaspeed outline die-cut vinyl "etched glass" decals
these are high performance cast 2 mil vinyl. it's very thin but strong vinyl that is optimum for long life outdoors. these are slightly transparent, giving mostly a silver look while letting a bit of light through. they look ideal on windows of cars of all colors, mainly because most people are using the stock silver wheels. they actually look factory when installed due to the quality of the decal.
i edited the original logo to cut well, had them cut on a professional plotter, and weeded them MYSELF (this took hours, those who have done it know what i mean). i did it to ensure that they were done perfectly. i also them masked them and cut/seperated them by hand.
the pricing is as follows-
12" - $10 + ship
10" - $9 + ship
8" - SOLD OUT
6" - SOLD OUT
i will ship them in a envelope between two stiff pieces of cardboard.
PAYPAL is preferred!!!
the 6" are the same as the 8" because they took 3 times as long to weed due to the fine lines. quantities for all sizes are VERY limited and this is the only color available at this time.
due to the 2 mil thickness, light color and extreme adhesion, i can provide marks on the mask to aid in installation. there is no going back once these are installed (unless you destroy the decal) so careful installation is required! if you buy more than one in an order, i'll take $1 off for each one ordered after the first decal.
EDIT: here is a vouch thread for me on another forum- http://www.honda-tech.com/zerothread?id=2060004 lazerbluep5 can most likely vouch for me as well!
EDIT: INSTALLATION TIPS!!!! http://www.mzspd3.com/forum/showpost.php?p=3759078&postcount=31
these are high performance cast 2 mil vinyl. it's very thin but strong vinyl that is optimum for long life outdoors. these are slightly transparent, giving mostly a silver look while letting a bit of light through. they look ideal on windows of cars of all colors, mainly because most people are using the stock silver wheels. they actually look factory when installed due to the quality of the decal.
i edited the original logo to cut well, had them cut on a professional plotter, and weeded them MYSELF (this took hours, those who have done it know what i mean). i did it to ensure that they were done perfectly. i also them masked them and cut/seperated them by hand.
the pricing is as follows-
12" - $10 + ship
10" - $9 + ship
8" - SOLD OUT
6" - SOLD OUT
i will ship them in a envelope between two stiff pieces of cardboard.
PAYPAL is preferred!!!
the 6" are the same as the 8" because they took 3 times as long to weed due to the fine lines. quantities for all sizes are VERY limited and this is the only color available at this time.
due to the 2 mil thickness, light color and extreme adhesion, i can provide marks on the mask to aid in installation. there is no going back once these are installed (unless you destroy the decal) so careful installation is required! if you buy more than one in an order, i'll take $1 off for each one ordered after the first decal.
EDIT: here is a vouch thread for me on another forum- http://www.honda-tech.com/zerothread?id=2060004 lazerbluep5 can most likely vouch for me as well!
EDIT: INSTALLATION TIPS!!!! http://www.mzspd3.com/forum/showpost.php?p=3759078&postcount=31
Attachments
Last edited:
