How To: Install Sounddeadening Material
- Thread starter BluMicaR
- Start date
You should read the sticky for this section. It is for posting how tos, not asking for them. This just causes clutter. You should create a how to when you figure this out.
With all of the money you have spent, you should consider a factory service manual.
-enganear
With all of the money you have spent, you should consider a factory service manual.
-enganear
BluMicaR, Let us know how this goes. I'm behind on jobs right now(TT, Boost Guage, Cobb SRI but one of the next things I do is to RAAMAT and Ensolite the doors. I'm actually thinking bout leaving the stock bose in and see how it sounds once deadened. Are you changing out the speakers and doing a system or leaving it stock?
Tom
Tom
I'm leaving it stock for now and just running wires, later I'll buy the converter thing and change out speakers. It's just a money issue. For now I'll be happy to hear more of the stereo and actually have a cell phone conversation (when I have to) without saying 'what?' every other moment because I can't hear the phone over the road noise.
Sorry if I offended. I thought I was stating a fact and offering advice, but I am just thick that way. (uhm)
-enganear
Well, it was too damned cold lately (-2* today without windchill) but I'm getting laid off January 31. Going to have some time to line my car up and do photos and a nice detailed write-up in February. See, I'm a realist, I see the good of a bad situation. Now if my manifold would arrive I'd have a few days work to do with the downpipe installation alongside. 
Eh, my company: (fuoops)
Eh, my company: (fuoops)
Well, it was too damned cold lately (-2* today without windchill) but I'm getting laid off January 31. Going to have some time to line my car up and do photos and a nice detailed write-up in February. See, I'm a realist, I see the good of a bad situation. Now if my manifold would arrive I'd have a few days work to do with the downpipe installation alongside.
Eh, my company: (fuoops)
BluMicaR,
Good luck to you. I got my last job through Monster.com, YMMV.
-enganear
Thankee sai, I'm hitting all the majors and 3 recruiters as of late. No luck yet, but I'm not sweating it. Barring another cold snap, it should provide ample time to install my RaamMat!
If i want to sound deaden the outer panel, inner panel, and door skin of all 4 doors with some raammat and ensolite and have enough leftover to do the wheel wells and the trunk how many square feet of each should i be looking to buy? I really can't even make a good guess. Raammat comes in 62.5ft^2 per roll.
Alright, thanks man
I know what you mean, not nearly as bad in NJ, but i just want one day that is warmer than 50 degrees so i can paint my calipers. Of course i missed my one day this past monday.
It comes in rolls of 15" by 50' and the stuff is .35lbs/ft^2 so i think the math comes out to 21.875 per roll. And apparently a roll is good enough for the four doors and have some left over
I'd have to take my spare out to balance out that weight!
... or go on a diet.
