Dyno Tune Results very happy

[ianknight]

Mazdaspeed6 06' with CP-E CAI, Custom 3' Exhaust, CP-E ems, Dyno tuned.

285.04 WHP
309 ftlb Torque

 

[Powerslave]

this is evidence that tuning with the standback is profitable!

 

[baseballd2]

nice numbers... do you have turboback or just catback exhaust?

 

[Igve2shtz]

Very impressive results.

 

[ZOOMit]

Mazdaspeed6 06' with CP-E CAI, Custom 3' Exhaust, CP-E ems, Dyno tuned.

285.04 WHP
309 ftlb Torque

time to test out your newfound hp...

*heeeeere evo evo evo*

 

[ianknight]

i have a custom exhause i deleted one our the cats i believe, correct me if i am wrong there is another cat on our downpipe which i did not delete

 

[ianknight]

time to test out your newfound hp...

*heeeeere evo evo evo*

i am going to the track friday, i will keep you guys posted with time slips (naughty)

 

[desperado-c]

Mazdaspeed6 06' with CP-E CAI, Custom 3' Exhaust, CP-E ems, Dyno tuned.

285.04 WHP
309 ftlb Torque

Very nice for just deleting one cat. What were the atmospherics like? I don't see any correction factors for temp/humidity.

 

[trufanatic]

very nice. how much boost? and considering drive train loss, that would be about 315-320whp on a 3... noice.

 

[laloosh]

its a dyno, they are anything but accurate based on overall output. Go to the track and see where it traps.

If anything this is proof that all you need is a boost controller as the a/f ratios are still safe and i highly doubt he added fuel. Save your money, unless you want to be able to tell people, yea im using an ems as a boost controller(dunno)

also make sure to frequently check you a/f ratio as they will change with weather.

 

[ianknight]

Very nice for just deleting one cat. What were the atmospherics like? I don't see any correction factors for temp/humidity.

88F 47% humidity

 

[ianknight]

its a dyno, they are anything but accurate based on overall output. Go to the track and see where it traps.

If anything this is proof that all you need is a boost controller as the a/f ratios are still safe and i highly doubt he added fuel. Save your money, unless you want to be able to tell people, yea im using an ems as a boost controller(dunno)

also make sure to frequently check you a/f ratio as they will change with weather.

Personally i think its a great investment! These cars run very rich i changed the A/F quite a bit. also i did not even raise the boost from stock! i guess opionions are opions but you dont gain over 45hp just using the EMS as a boost control

 

[LBV]

So besides AFR changes, only timing was done? Nice!

 

[bova80]

if its all about the trap speed laloosh, how much hp you think i have if i trapped 98.3mph?

 

[BlackMS6]

nice numbers... in for the track times

 

[that_guy]

Nice

 

[blthlt]

if its all about the trap speed laloosh, how much hp you think i have if i trapped 98.3mph?

I trapped 108 with a 2.1 60' what are my hp numbers in my MSP?

 

[laloosh]

a ms6 trapping 98 mph is probably only 250-260 max

As for the 108 car, if thats a ms6 your probably looking at over 330 if its a ms3, probably right around 300. if it a protege, 280? i dont know proteges

 

[bova80]

ok cause thats what my car ran with just an intake.

 

[bova80]

and that was with a 2.1 60' ft time