WillKill MP5 Build

[BlkWidow]

The weather is nice, so I wanted to do a photo shot of most of the parts I have to put on the car. Their are still some parts on order, need to order, build, or redo in the next couple of months. That is after i fix the wife car from the hit and run a few weeks back. I am going to be doing updates as it happens.

 

[BlkWidow]

old set up

 

[BlkWidow]

Suspension Work to be done

1. ROTA GT3 in BLACK (JUST FOR YOU SANBLASTER1 !!!!!!)(not shown have to pick them up)
2. GT Spec Front strut bar (Installed 04/23/09 but bar to be polished)
3. GT Spec 4-point Ladder Brace (Installed 04/23/09)
4. GT Spec Rear 4-Point Linkage Bars (Installed 02/10/09)
5. GT Spec Trunk Reinforcement Bar (Installed 02/10/09)
6. Front MSP sway Bar
7. AWR Front/Rear Swar Bar Links (Installed Rear 05/016/09)
8. Front Camber Bolts
9. Install Posi Quiet Front Brakes (Installed 09/10/09)
10. Racing Beat Rear Sway Bar (Installed 09/10/09)
New Pads
http://i241.photobucket.com/albums/ff236/boostdmp5/DSCN1603.jpg

4-Point Ladder Bar Installed

• <!-- BEGIN: Album Thumbnail Element 0 -->
  
  
  
  
• 
  
• 
  

AWR Sway Bar Links




Racing Beat Rear Sway Bar






<!-- END: Album Thumbnail Element 0 --><!-- BEGIN: Album Thumbnail Element 1 --><!-- END: Album Thumbnail Element 0 -->

 

[BlkWidow]

Interior Work to be Done

1. Install WHITE SOX CAPS!!!!!!!!!
2. Install MSP Floor Matts
3. Instll Carbon Fiber Glove Box Panel (Installed 3/10/10)
4. Install Steering Column Gauge Pod (sold)
5. Install Dead Pedal

C/F Cover Installed

 

[BlkWidow]

Exterior Work to be Done

1. Install New Splash Guards (Fixed 04/20/09
2. Replace Broke Neon (Replaced 04/24/09)
3. Install TCS Carbon Fiber Mirrors SOLD
4. Install MazdaSpeed License Plate Cover (05/16/09)
5. Install New Front Plate Bracket(Installed 04/23/09)
6. Install LED Rear Signal Bulbs(need to orde more)
7. Install JDM Rear taillights (Installed 2/14/11)
8. Install Isport C/F Rain guards (Installed 12/24/10)
9. Install Isport C/F Rear Spoiler Lip (Not mounted Just what It would look like)
10. Install Isport C/F ADP (This is for show)

Front Plate Installed


Old Splash Guards


New Splash Guards Installed


JDM Taillights




Spoiler Lip not mounted yet


ADP for show

 

[BlkWidow]

Audio Work to be Done

1. Build 12" Single Speaker Box
2. Rewire Amps

 

[BlkWidow]

Engine Work to be Done



1. Install MAM Manifold (Installed 02/08/09)
2. Install MAM Down-Pipe(Installed 02/28/09)
3. Install MAM Vaccum Block (Installed 04/24/09)
4. Install GT28RS(Installed 02/028/09)
5. Install Perrin Fuel Rail
6. Install AWR Rear Engine Mount (95 durometer) (Installed 07/15/10)
7. 1.8 Valve Cover(precut for cam gears) (Installed 01/20/10)
8. WRX injectors(SOLD to Deatschwerks)
9. High Flow Fuel Pump
10. MSP ECU (Installed 02/09/10)
11. SSFC(SOLD GOING WITH MICROTECH)
12. J&S & Knock Sensor (Sensor and wire installed 04/25/09) Need to wire in into ECU
13. SLS thermostat housing(installed 02/28/09)
14. MicoTech LT-10s(arrived)
15. Install NEW Deatschwerks 440 Injectors(arrived 4/08/09)
16. Install Weapon R Oil Catch Can (04/23/09 Installed)
17. AWR Oil Pan (Installed)
18. Coolant lines new ones (Installed 05/16/09)
19. 3" Air Filter (Installed 02/01/11 so i can stop hearing you need something)
20. MSP Oil Cooler (Installed 05/15/10)
21. ProSport Oil Pressure, Oil Temp & Coolant Gauges (Installed 05/15/10)
22. CorkSport Radiator (Installed 11/12/10)
23. MFactory LSD (At a shop being installed w/GTX 3rd & 5th gears)






02/08/09 what's missing?



02/08/09 Sealed (alright)



02/08/09 Need to reclock




02/08/09 Manifold and WG mounted


Weapon R Catch Can Installed 4/23/09



MAM Vacuum Block Installed 4/24/09



MSP Oil Cooler w/ProSport Oil Pressure & Temp Sensors 05/15/10


ProSport Temp Sensor


Gauges Installed


Gauges During The Day


Gauges During The Night



CorkSport Radiator


CorkSport Installed w/JDM 1.3 Cap




Trans Out of The Car


MFactory LSD on Drive Shaft


Clutch Master Stage2




<!-- END: Album Thumbnail Element 4 --><!-- BEGIN: Album Thumbnail Element 5 --><!-- END: Album Thumbnail Element 0 --><!-- BEGIN: Album Thumbnail Element 1 -->

 

[BlkWidow]

Redo Work to be Done

1. Reroute FMIC Piping (All done 04/22/09)
2. Tuning

 

[daonly1around]

building ANOTHER protege? or taking your old one further?

 

[BlkWidow]

building ANOTHER protege? or taking your old one further?

adding to what I already have, the car has got me (whip).

 

[NRRfrogmanP5]

ive heard that candy land mod adds like 15 whp.. let me know how it works out lol

 

[mp3-79bronco]

those mirrors are hideous

 

[BlkWidow]

those mirrors are hideous

(moon)

 

[dominoy2k1]

is that a spool mani? how much did you pay for the splashguards for under the car?

 

[kickniteasy]

no pics showing for me =(

 

[BlkWidow]

is that a spool mani? how much did you pay for the splashguards for under the car?

here is the link http://www.trademotion.com/partlocat...yCat alogid=0 was like $14 plus shiping, and its the MAM manifold<!-- / message -->

 

[daonly1around]

if i remember wasn't the old spol manifold a cast iron, but tubilor manifold

 

[BlkWidow]

if i remember wasn't the old spol manifold a cast iron, but tubilor manifold

the newone is a MAM, the first one was a custom manifold

 

[kz9]

I have those same TCS mirrors. They look pretty good. Just take your time and get the fittment right on. I have to cut down the mounting perches to bring them closer to the body and window trim.

 

[BlkWidow]

ive heard that candy land mod adds like 15 whp.. let me know how it works out lol

if u dont remember how its works then I'm not going to show u