Spool Prototype For Msp

[spoolinmp3]

The title says it all.
In the next month we will use Cirielle's car for full upgrade bolt-ons for the stock turbo setup. We will be performing extensive real time on road testing and datta logging with a wideband. We will also perform dyno tests with a BASELINE dyno and a subsequent final dyno after parts are installed.
We will have the following parts in production very soon

MSP oem upgrade hardpipe I/C kit

FMIC upgrade kit w/BOV

Downpipe 3 inch

Performance Intake

Full Cat back Stainless steel HKS Exhaust

Microtech plug and play stand alone engine managment


All parts will be constructed of high grade polished stainless steel and forged steel when necessary.

We will have an intial run of 30 pieces and will commence a group buy. I will notify everyone when the time comes. I would like to personally apologize for this extreme delay but moving and orders for our kits where a bit overwhelming for us. Some of you may have remembered that I was intially going to purchase an MSP but we decided to go with another project car to diversify.
Thanks and if anybody is looking for anything else post away!

 

[LiLiTaLy]

May I be the first to say... THANK YOU

 

[Captain KRM P5]

once again Terry, your work and tireless dedication is an inspiration to us all.

 

[SuperSpud]

oh damn.... this is very good news.... does the DP come with cat?? will it be CEL safe??

 

[INGREXCO]

i love you man.

 

[boostisgood]

Terry,

You kick ass. Keep up the good work, and pm me if you need another test mule. Ill drive down for a weekend and get bolted up.

 

[murdock_]

thanks man

 

[Heathen23]

Arghghahgahg...That's the sound me (or homer j simpson) drooling. I look forward to the updates!

 

[Kooldino]

Sweet (thumb)

 

[funnylittlman]

 

[DS142002]

A couple things I would like to know. First is when can we place orders for these? Second is what is the dimensions of the FMIC, will there be cutting involved? Third the Mircotech will it come with software to use and tune or will that be later on down the road? and finally will you have the parts with you at the thing on July 27th? (SPOOL OPEN HOUSE BBQ SHINDIG)

Ps thank you very much for you time you are putting into the MSP to help us out. It shows the quality of your work. I cant wait to send you my money.

 

[AGR]

This is all very exciting....

CAI or short intake.........? What is the price, I wonder?

 

[starflare21]

is that HKS exhaust system custom by you guys or is it an off the shelf item that was just released/prototype?

 

[AFaceInTheCrowd]

ALL HAIL THE SPOOL I.T.S.!!!

 

[DaKidd]

I have 2 questions as well. First of all, THANX for all ur work, and thanx for sticking to the msp turbo upgrade project. ok, 1) will the upgrade be compatible with injen intake that I already have on the way? 2) will u include high flow cats with this exhaust? And again, thank u.

 

[Cirielle]

All I have to say is YIPPY FOR ME!!!!
YIPPY FOR ME
YIPPY FOR ME
YIPPY FOR ME

 

[AGR]

All I have to say is YIPPY FOR ME!!!!
YIPPY FOR ME
YIPPY FOR ME
YIPPY FOR ME

yeah perfect....so what are they going to be offering Intake wise? any ideas?

 

[Cirielle]

yeah perfect....so what are they going to be offering Intake wise? any ideas?

Are you asking pricing? Cuz I am not sure about that at all. Really Terry was very busy when I went up there to discuss things with him.
Any major questions just ask Terry, he is always willing to give you the 411 on everything!!!

 

[AGR]

Cool!

Want another intake,,,but undecided. Talking to some WRX owners, and they are saying there are alot of better ways of spending a couple of hundred dollars than on a CAI for a turbo car.... interesting.

 

[spoolinmp3]

A couple things I would like to know. First is when can we place orders for these? Second is what is the dimensions of the FMIC, will there be cutting involved? Third the Mircotech will it come with software to use and tune or will that be later on down the road? and finally will you have the parts with you at the thing on July 27th? (SPOOL OPEN HOUSE BBQ SHINDIG)

The dimensions on the FMIC are a bit classified, we dont want to give away our R&D specs. Howver it fills the front hole in the grill and is good for 400whp. Cutting will be invloved since we want pipes with minimal bends. We could make a FMIC with no cutting invloved but the pressure loss and responsiveness loss would negate the FMIC upgrade so we are sticking with a straigh shot deal with minimal bends. We will have some goodies for ya to look at.........prototype stuff and you will get a good idea what it looks like by looking at our other kits we will have on display.

Ps thank you very much for you time you are putting into the MSP to help us out. It shows the quality of your work. I cant wait to send you my money.

Thanks for all your enthusiasm guys

is that HKS exhaust system custom by you guys or is it an off the shelf item that was just released/prototype?

Prototype

I have 2 questions as well. First of all, THANX for all ur work, and thanx for sticking to the msp turbo upgrade project. ok, 1) will the upgrade be compatible with injen intake that I already have on the way? 2) will u include high flow cats with this exhaust? And again, thank u.

We may just go with a short style intake unless you guys want different. Something to replave the piping and mounting a high flow on it. And yes all the parts are compatable wih other parts ect and oem parts as well. The exhaust will be 100% emmisions legal and will include high flow cats