Hello everyone, I'm pretty sure this is my first post on this forum. I signed up here a couple years ago when I got my MS3 but never spent much time besides lurking for some info bits.
This is not at all related to my MS3 but a different project.
I've spent weeks searching for the information I'm asking for here and have not come across what I'm looking for so I'm really hoping someone here can help me. I'm looking for some dimensions of the rear hubs from a P5. Specifically this will be the hub and bearing combination part on the rear spindle. The hub needs to be a disc brake hub, preferably non-abs. I'm pretty sure the same part is used in P5s, MSPs, Protege 5-lugs, and MPVs with disc brakes.
Here's what I'm needing, mostly with pictures:
A: hub length from rearmost point to hub face
B: rear bearing mount outer diameter
C: Bearing inner diameter
D: Depth from lip to hub face
E: Depth from lip to front bearing race
F: Depth of bearing stack
The last 2 I don't have pictures of because I though of them late
G: hub face thickness (at narrow points, not where studs press in)
H: hub face diameter (largest circle)
If anyone can provide this information it would be very, very much appreciated. Ignore the caliper readings, that hub is just being used as a measurement orientation reference. If anyone has an old hub laying around they'd be willing to send me I'll pay shipping to get it here and take measurements myself. I've tried finding one in junkyards, ebay, everywhere local with no success and I'd rather not buy new quite yet.
Thanks everyone.
This is not at all related to my MS3 but a different project.
I've spent weeks searching for the information I'm asking for here and have not come across what I'm looking for so I'm really hoping someone here can help me. I'm looking for some dimensions of the rear hubs from a P5. Specifically this will be the hub and bearing combination part on the rear spindle. The hub needs to be a disc brake hub, preferably non-abs. I'm pretty sure the same part is used in P5s, MSPs, Protege 5-lugs, and MPVs with disc brakes.
Here's what I'm needing, mostly with pictures:
A: hub length from rearmost point to hub face
B: rear bearing mount outer diameter
C: Bearing inner diameter
D: Depth from lip to hub face
E: Depth from lip to front bearing race
F: Depth of bearing stack
The last 2 I don't have pictures of because I though of them late
G: hub face thickness (at narrow points, not where studs press in)
H: hub face diameter (largest circle)
If anyone can provide this information it would be very, very much appreciated. Ignore the caliper readings, that hub is just being used as a measurement orientation reference. If anyone has an old hub laying around they'd be willing to send me I'll pay shipping to get it here and take measurements myself. I've tried finding one in junkyards, ebay, everywhere local with no success and I'd rather not buy new quite yet.
Thanks everyone.
Last edited:
