Need Advice Install Greddy Profec B Spec II

[nmaino]

Need Advice Install Greddy Profec B Spec II and Full Auto Timer

Hello to all,

I just recieved my Greddy Profec B Spec II and I'm going to install it this up coming week. I need some advice as to how to install this thing. Exactly where do I tap into the MSP actuator system? I'm very good with electronics, but the Greddy instructions do not help at all. Any advice on how to properly install this thing would be great. Thank you.

 

[OutDriveU]

The vac line that runs from the controller goes into the same place you put your boost guage(if u did it properly) tap the other part that runs to the controller solonoid where the pic says. you can tell then what line goes to the wastegate actuator so you can connect that end the the coorsponding inlet on the greddy solonoid per the instructions.

Hope this helps im tired or id right more but if u have any ??'s pm me

lata

 

[OutDriveU]

whoops heres the pic

 

[nmaino]

Thanks, I'll give it a try.

 

[nmaino]

I'm also installing a Greddy Full Auto Timer. The instructions say to install the Purple wire to the "speed" wire coming out of the ECU. I have a HKS Type-0 TT installed right now and I'm funning the RPM wire off the purple/white wire (I think, well, the TT works) and I'm thinking that Greddy's "speed wire" is just the HKS "tach" wire. Where are you guys who are running the Greddy finding the "speed" wire that they are talking about? Am I right in thinking that it is the same wire?

 

[Dexter]

speed and tach arent the same thing man.

wire color codes in car audio / electronics

 

[t3ase]

I'm also installing a Greddy Full Auto Timer. The instructions say to install the Purple wire to the "speed" wire coming out of the ECU. I have a HKS Type-0 TT installed right now and I'm funning the RPM wire off the purple/white wire (I think, well, the TT works) and I'm thinking that Greddy's "speed wire" is just the HKS "tach" wire. Where are you guys who are running the Greddy finding the "speed" wire that they are talking about? Am I right in thinking that it is the same wire?

Not to get on your bad side here, really, but I thought you were selling the 'Speed?

 

[nmaino]

Well, I'm going to try this first. I notice t3ase that you have the full auto timer. How did you install it?

Don't worry, you are not on my bad side at all.

 

[t3ase]

I cheated and had OrangeMSP install it for me. He works at a local car audio shop, so I felt much more confident letting him hack away at the wiring. We're going to meet up and reinstall it sometime, I'll take notes.

 

[nmaino]

Thank you.