I am stuck on an oem 2010 Mazda5 auto start new install. Help.

[iowagold]

ty
I am stuck on an oem 2010 MAZDA 5 auto start new install
the dealer sold me the newer version...
0000-8f-L82
darn bcm wiring is different!! lol
as well as the brake plug wiring.

Anyone have a good pin out for the bcm as well as the brake plug by the hood lever?

 

[iowagold]

the dealer came through
at least with the wiring pin outs.
now how to get it out of valet mode?
i looked in the owners manual and did not see any mention of it..
any ideas?

 

[iowagold]

stuck again.
it is beeping 3 times then pause and one more beep and no start.
question, this is a 2010 5gt
so does the BLACK / YELLOW door ajar need to be connected for the auto start to work?

also there is a black / orange in the bcm new branch loom from the 0000-8F-L82
does this need to be connected? if so where?
this had the oem hood switch from the factory.

 

[iowagold]

any mazda dealer techs in here?

 

[iowagold]

BUMP any mazda dealer techs in here?
i need to know on the oem mazda auto start what the tach sense wire needs for signal.