Help !!Turbo and J pipe.

[mazdaprotegeES]

Anyone out there know if i can use a msp J pipe with this cast pipe(i belive thats what its called)?

The Bolt Patter of this is the same as the msp J pipe. which is 2,1/2 inch in length from each bolt. Help me out please.

 

[Brian_K]

msp j-pipe is the same as a regular 2.0 protege j-pipe. so if you have access to one of those you can see if it will fit. the orientation of the j pipe when connected to that turbo looks like it might be off. but you really wont know until you do a mock up.

 

[mazdaprotegeES]

just by looking at it it seems like it might be off. I was told that Mayb I could use it with this turbo. Was just trying to see if anyone out there has used a j pipe with a different turbo then the stock msp turbo.

msp j-pipe is the same as a regular 2.0 protege j-pipe. so if you have access to one of those you can see if it will fit. the orientation of the j pipe when connected to that turbo looks like it might be off. but you really wont know until you do a mock up.

 

[protege3690]

you can use any turbo you want. just have to have the right manifold, downpipe and midpipe to make sure it all fits in properly. its not a lot of room to work with, but you can always go to a fabricator and have a pipe made to fit with that flange.