GI: I/C Sprayer

[K-S-W]

Put me on the list please.................

 

[noclue119]

forums are quiet today give it time !

Ya no kidding its like the day that everyone decided to take off... Oh well still waiting for the guy's email back..

 

[jeffmsp]

so this will bolt right onto our stock msp intercooler (doesnt look like it from the pic provided, maybe its just me thought) what would happen if this sprayed onto the rad since its right beside the ic (or have they already found a way around this, i dont have much experience or knowledge with a setup like this) Any idea how many sprays I could get out of one of these setups and how much is it typically to fill the bottle? Anyways to configure it to spray at WOT or would you only want to spray before your run?

Thanks, Jeff

 

[celdridge]

I would be in ... but i need to know about remote open and close first. I dont want to have to manually go to the trunk and open the bottle to operate it. I really want to use one of the dummy dash buttons to turn the system on or off. Anyone good at wiring or know if this is possible.

If you know how ... then im in.
Chad

 

[steve_protege]

1) noclue119
2) Mazdaspeedchick
3) pro5man
4) Leonardo
5) Freekwonder
6) Steve_protege
7)
8)
9)
10)

Got my attention!

 

[TurfBurn]

so it is spraying just the CO2 onto the IC? and you have to open/close it etc by hand?

Just curious.... I'm probably going to build a full water one custom... but that's pretty sweet and simple! rock on!

And btw.. if you ever have a CO2 tank blow.. DON"T TOUCH IT OR PICK IT UP! you will screw up your hands with some serious burns (cold burns.. not hot).

 

[SaaBaaDoo]

got a question! When you put these things on, do you take off the bumper and do it from the front, or do you scrap the fan on the back and put it there???

 

[GAspeedProtege]

I'm in

 

[TurfBurn]

usually have to go on the front.. otherwise at any speed you'd "lose" all of the discharge.

 

[srtchick]

the more interest the better keep em comming!

1) noclue119
2) Mazdaspeedchick
3) pro5man
4) Leonardo
5) Freekwonder
6) steve_protege
7) Turfburn
8) GAspeedprotege
9) SaaBaaDoo
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)

 

[TurfBurn]

I'd mostly only be interested in the loop if anything.. just a note!

 

[BlkZoomZoom]

LOL you guys are gonna pay almost $80 for this??? I made mine almost exactly the same for less than 40......

 

[noclue119]

LOL you guys are gonna pay almost $80 for this??? I made mine almost exactly the same for less than 40......

some of us don't like doing work. we just want it to work.. so yes i'd pay 80 for it..

 

[BlkZoomZoom]

Damn......maybe I should make mine and sell them.......

 

[GAspeedProtege]

(threadjack) Blkzoomzoom, did you notice a difference in sound when you changed your BPV, or was it just something you wanted to do?

 

[noclue119]

(threadjack) Blkzoomzoom, did you notice a difference in sound when you changed your BPV, or was it just something you wanted to do?

man GAspeed i'm the offical threadjacker... quite taking my job or i'll have to take u out

 

[kNOWfREED0m]

1) noclue119
2) Mazdaspeedchick
3) pro5man
4) Leonardo
5) Freekwonder
6) steve_protege
7) Turfburn
8) GAspeedprotege
9) SaaBaaDoo
10)kNOWfREED0m
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
Damn i've been waiting for someone to start making these. 80 + shipping isent THAT bad, i just hope the electrical set up with a switch would be achievable, like how the Sti has its i/c sprayer. (threadjack) Blkzoomzoom, hey dude if you wanna make me one like yours ill give you 50 bux plus shipping plus a tip!

 

[03MSP]

1) noclue119
2) Mazdaspeedchick
3) pro5man
4) Leonardo
5) Freekwonder
6) steve_protege
7) Turfburn
8) GAspeedprotege
9) SaaBaaDoo
10) kNOWfREED0m
11) 03MSP
12)
13)
14)
15)
16)
17)
18)
19)
20)

 

[PHILLY-ORANGE]

wont you hit full cut alot easier?

 

[noclue119]

wont you hit full cut alot easier?

i heard only in first and if u spray too much...