foglight options for 03.5

[lastsaga]

i wanted to add some foglights to my 03.5 msp and i was wondering what options i have in terms of fitment and how to mount them.

i want fogs that will fill up the entire vent, and are a deep yellow color..

sorry i've been searching around on the forums but there are just too many threads and i haven't come across actual part #'s or suggestions.

i want to avoid the stock 03 fogs since i've read they require a bit of dremeling of the 03.5 lip.

i'd prefer to stick with known brands that offer warrantees, such as piaa, raybrig, ipf, etc., but i'll look at anything else that's out there.

btw, i've come to the conclusion that the fog lights won't make much of a difference to my injen cai, so .. eh.

thanks.

 

[JHew84]

personally i have not seen someone use foglights that fill the hole completely and also keep the 03.5 lip, i suppose it could be done but i've never seen it and everything i have read points towards the removable of the lip for melting purposes...

what i do know, is that you will need the stock brackets from an 03/P5, and if you want it to look clean you might as well grab the switch off them as well... part numbers i dont know, but i beleive there is a group buy going on in the venders forum right now for PIAA fogs, and they are bound to have one that is the right size, you might want to start there (thumb)

good luck...

- James

 

[hazeXban]

These are my fogs on the 03.5 MSP. They were offered by a guy who no longer does this stuff but you might be able to find someone selling the brackets and you can go from there.

 

[hazeXban]

This help at all?

The guys name Was Brian and his SN was like 03.5MSP I think, his brackets were the G3's but he also had G2's which I have. Not sure how many fogs will line up with the brackets light mounts but should be modifiable,

 

[II-Savy]

Yea he's gone, he bought a crappy Acura ... j/K

He is gone though, I have a set, there is a pic here somewhere...

can't find it.....

 

[lastsaga]

so he made the foglights?? or the brackets?

those fogs look like the halo type.. i'm looking for regular bulb type, and in yellow.

in any case, what are the dimensions on those halo fogs you have on your msp hazeXban? diameter/depth/etc? thanks for the info

 

[II-Savy]

so he made the foglights?? or the brackets?

those fogs look like the halo type.. i'm looking for regular bulb type, and in yellow.

in any case, what are the dimensions on those halo fogs you have on your msp hazeXban? diameter/depth/etc? thanks for the info

Yea dude he MADE the fog lights.....he has a glass blowing shop at his house. lol
(smash)

Here are the fogs - http://www.autobarn.net/pi4inrofogli1.html

He made the brackets.

 

[hazeXban]

http://www.pilotautomotive.com/pilot2as2.htm


Here is the company website

EDIT: Just noticed Savy already did

 

[mspdfreak]

LOL, he made the brackets, but is gone now. The Angel Eyes are the ones that fit the brackets he made. I've never seen the big yellow ones on an MSP. However, I think someone tinted the angel eyes yellow or something. You pretty much have to take off the 03.5 lip to get the ones you want to fit.

 

[II-Savy]

LOL, he made the brackets, but is gone now. The Angel Eyes are the ones that fit the brackets he made. I've never seen the big yellow ones on an MSP. However, I think someone tinted the angel eyes yellow or something. You pretty much have to take off the 03.5 lip to get the ones you want to fit.

I don't really think so.....
You can get lights up to 5 inches and you should be ok....going with something bigger....then maybe not. Look for the same deminsions as the links listed and then get a yellow set. My cousin has yellow ones on his speed.

 

[lastsaga]

Yea dude he MADE the fog lights.....he has a glass blowing shop at his house. lol
(smash)

Here are the fogs - http://www.autobarn.net/pi4inrofogli1.html

He made the brackets.

-_________-;; (hand)

 

[LASERBLUE135]

http://www.autobarn.net/pi4inrofogli1.html
thanks for the link to the fog lights...
but do you guys have a link to get the brackets...G3's if this is what you need for the install

 

[Mark94]

He is no longer making the brackets and has left the mazda community. You can't buy these anymore, only if someone is selling them second hand - like the the Dave B rings.

I modified my brackets because I wasn't too crazy about how far they stuck out in the lip. I think it makes it look a little more like the car came that way.

Good luck finding them, they are out there, you just have to be patient.

Mark

 

[Newf]

i got a set here somewhere. Not sure if I'd sell them though.

 

[Ryoga28]

I got one of the last sets he had ^_^.

 

[Swerny]

http://www.msprotege.com/forum/attachment.php?attachmentid=40379

Looks really good Mark94!
Is that as ES FMIC?

 

[txmzdspd2gen]

is there a way to duplicate the bracket or improve it?? i wanted one also

 

[H-Town Speed]

This is what the brackets looked like. Like everyone else said, these are not made anymore. Maybe if someone had a set of unused/unbent ones, someone else could step up to the plate and start to make these again. Or maybe Brian(03.5MSP) still has the measurements and would be willing to sell them to someone.

 

[Mark94]

http://www.msprotege.com/forum/attachment.php?attachmentid=40379

Looks really good Mark94!
Is that as ES FMIC?

Thanks MS, unfortunately it is the ES kit. I have not had a problem with the kit (knocking on wood) but it was an absolute horror to get.

Mark

 

[Crock]

I have a set of G3's too. The fogs are going on my grey car as soon as springtime is here.