engine

need one from this specific 626 2.0L FS model. must be the complete pipe from Intake to exhaust manifold PM me

so guys i got a new engine and i realized my rpm drops to a low of 200-250 while ideling or in trafic waiting on the red light some times its alright at its normal of 750 while ideling but most of the times it drops really low but never stalls can anyone help with this problem ? Thanks guys

Hey guys, just a quick question about the rotary engines. I was thinking about buying an '83 RX7 off someone, but they said it dies whenever it goes under 2,000 RPMS. Apparently the carb was rebuilt, and they don't think it's the vacuum or timing. They suggested that it is a "blown" rotor in the...

so guys after my last post about my engine having the knocking sound my engine diededd :( ( 159k milles anyway i had to get a engine swap so my current engine was the 1.5 liter mazda axela sedan 2006 engine but now i could only find a 1.6 mazda axela engine 30 k miles on it and 2 years garentee...

Hey, just a shout out of thanks to all your guys who contribute to this forum. I finally solved my stuttering P5 issue after like 2.5 years. The Fix for me seemed to be removing the connectors to the VITC and other electronics, cleaning with contact cleaner and connecting back. I also...

so recently after i was in a rush speeding home the next day when i switched my car on and wanted to drive there was a weird knocking sound in the engine bay are and also when i put my foot on the gas alittle theres theee zzzzzzzzzz sound but that has beeen there for ages now .. the problem is...

What is the best shortblock to get quality (forged) parts in? I am skeptical of Cp-e shortblocks because they have K1 rods in them, and I have heard nothing but bad news from those. My rods are currently bent, and I figured this is the time to rebuild BIG. I want this engine to last me, and also...

Hello everyone. Just replaced alternator in 2006 Mazda5. Since the online info world sucks for Mazda5 How-to's I figured I would post here for anyone wanting to do this. Very easy and straight forward. Minimal tools needed and should not take long for anyone that likes to work on things...

The engine on my Mazda5 suddenly revs(races) with my foot on the brake. I have stopped at a light with my foot on the brake. The car stops normally. After about 3-5 seconds the engine suddenly revs and the car lurches forward. Applying the brakes harder does not help. The only way I can prevent...

Hi all. I just purchased a new-to-me 2010 CX-9 GT AWD with 25k miles. After scouring the forums, I'm starting to freak myself out that there might be a transfer case issue, but the symptoms don't really match up with what I'm reading on here. Anyway, when accelerating from a stop, and only in...

My mazda has ran fine no real issues to speak of, then one evening when getting in to drive home from work the car would turn over, fire off begin to idle then die but after about 3 times ran perfectly fine. Got home turned it off and it fired up no issue, next morning it was doing the same so i...

Hello 247 Its been getting quite cold here lately(-5/-10 C) and im experiencing a ticking noise from the 1.3 lt engine that disapears as soon as the engine gets up to temperature. I was thinking it might be a valve thing, bit considering the fact the this model uses a timing chain, im more...

Hi guys, i have a kn laser same chassis as a bj Mazda I am just after the location of the engine number It is a 1.8L Any help is appreciated, thankyou

I just had the head rebuilt, and as soon as I got it back together and running it threw a rod. Any suggestions on a new short block to get and where to find one? I figured I'd go big and get forged parts so this never happens again too.

Request to delete or lock thread.

https://www.youtube.com/watch?v=r3ckGmVTqWc This is a link to show you how to properly remove your engine from your Mazda Protege! If you have any questions, feel free to post them in the comments!

I have a 2003 p5 with about 123,xxx miles on it and just the other day after driving over a small bump on the road something sounding like an exhaust leak was heard from the front of my car. It was strange as I always drive over these kinds of bumps/roads in the northeast, and it has never...

It's been a very bad week and I'm hoping this community can give me some advice. I have a 2008 CX-7 AWD with the 2.3L turbo, about 115K miles on it. On 11/8/14, while driving down the highway, the engine began making a high pitched whine. Didn't sound like a belt, didn't sound like anything...

I'm looking to turbo my 2 like everyone else, the only thing I need to find is a exhaust head flange so I can make a turbo manifold. any leads would be great. 2011 2 yozora 1.5L G. like this ^

Hi, I have a 2007 mazda 3. I feel there is something wrong with the transmission. When I drive the car the gear shift is not smooth and produces little jerks which I find strange for an automatic transmission. And when the car is cold putting it in reverse produces significant amount of jerks...