can be any color and can be either sri or cai.
wtb: msp aftermarket intake
- Thread starter byohndspeed
- Start date
- Status
TX Speed Demon
Member
I've got a blue Perrin SRI I could sell. You interested?
I'll dig it out tonight and see if it is missing anything.
---
I feel obligated to tell you: You must recirculate with this SRI. The Perrin places the MAF too close to the turbo and when you don't recirculate you get some blow back causing stalling issues.
Also you will be pulling in hot air from behind the radiator fan so sri won't be as effective as an CAI.
Here's a Pic of when it was installed on my car:
If you're still interested I'll sell it cheap since it's just taking up space in my garage.
I'll dig it out tonight and see if it is missing anything.
---
I feel obligated to tell you: You must recirculate with this SRI. The Perrin places the MAF too close to the turbo and when you don't recirculate you get some blow back causing stalling issues.
Also you will be pulling in hot air from behind the radiator fan so sri won't be as effective as an CAI.
Here's a Pic of when it was installed on my car:
If you're still interested I'll sell it cheap since it's just taking up space in my garage.
Last edited:
what is cheap?
TX Speed Demon
Member
I don't know, $65 including shipping would be ok by me. It cost $200 new. I'd also be willing to trade for a AWR Front Motor Mount.
There is a tear in the filter at the top of the Perrin Logo, and it's missing the thin blue silicon hose that recirculates some of the air from the engine. You don't need that hose, in fact it's better to put a breather filter on the engine instead so you don't draw oily air back into your intake and turbo. If you do that you'll need to plug the hole in the intake. Or you could bore it out with a dremel and stick your Intake Temp Sensor in there instead of leaving it exposed in the engine bay or sticking it in the filter like I did.
It does have the recirc tube for your bpv secured into the intake with about 2 feet of heater hose which you can attach to your stock BPV to recirculate and 3 worm clamps.
My wife comes back in town with our digicam Thursday night so hopefully I can get some recent pics for you Fri-Sat.
There is a tear in the filter at the top of the Perrin Logo, and it's missing the thin blue silicon hose that recirculates some of the air from the engine. You don't need that hose, in fact it's better to put a breather filter on the engine instead so you don't draw oily air back into your intake and turbo. If you do that you'll need to plug the hole in the intake. Or you could bore it out with a dremel and stick your Intake Temp Sensor in there instead of leaving it exposed in the engine bay or sticking it in the filter like I did.
It does have the recirc tube for your bpv secured into the intake with about 2 feet of heater hose which you can attach to your stock BPV to recirculate and 3 worm clamps.
My wife comes back in town with our digicam Thursday night so hopefully I can get some recent pics for you Fri-Sat.
Last edited:
sounds good to me. what type of payment will you take?
TX Speed Demon
Member
Paypal will work. I'll send you the information once I get recent pictures later this week.
ok
TX Speed Demon
Member
PM and additional pictures sent.
- Status
