Will these ssr wheels fit msp

first of all, we know that they are SSR "replica"..... um, okay, thats not so important I guess.

Secondly, 17x7 with 215 tires is really not going to rub on the struts so you do NOT need spacers. Spacers will move the wheels OUTWARDS to each side of the car. With the 38 offset, you are now worrying that if it will rub the fenders.

38et is really going to be a tight fit. I have 17x7.5 with 48et and 215 tires, I have very little margin until it rubs so you may have so luck if your car is not lowered much.

Well, worst case is that you have to roll & pull the fender which then will clear it.
 
msfamilia said:
first of all, we know that they are SSR "replica"..... um, okay, thats not so important I guess.

Secondly, 17x7 with 215 tires is really not going to rub on the struts so you do NOT need spacers. Spacers will move the wheels OUTWARDS to each side of the car. With the 38 offset, you are now worrying that if it will rub the fenders.

38et is really going to be a tight fit. I have 17x7.5 with 48et and 215 tires, I have very little margin until it rubs so you may have so luck if your car is not lowered much.

Well, worst case is that you have to roll & pull the fender which then will clear it.

my car is still at stock height. It hasn't been lowered at all
 
With a 38 offset, your wheels are going to stick out past the fender.

With a + 38 offset and 215 tires, it will rub even at stock height when you go over bumps. Good luck
 
I am getting away with running a 17X7.5 rim with a 40mm offset with 205/40/17 and I just clear , I am lowered on Teins S techs . I tried a 214/40/17 and it touches the fender . If you have a 5 the rims wont work ,the offset min is 45mm 17X7 for the 5 with a 205/40/17
 
Back