will these rims fit my mazda 3 hatchback?

ben tracy said:
so would they?

If you click the link below the picture that says car application, I bet you would find out. It doesn't have the 3 listed, but the bolt pattern will be the same as the Protege/MP5. Just check the offset and you should be fine.
 
$839 each!!! That's more than I paid for 4 new rims with tires....dayam...
 
That web site sucks. They don't give you s*** for specs.

You're going to have to check the bolt pattern, width and offset. The bolt pattern has to be 5x114.3, the offest has to be around 45 and the width should be 7.0 or 7.5.
 
Exposed rivets on a dark background are not my cup of tea, but to each their own.

Best I can tell is that $839 is for a set of 4 and includes tires...unknown brand, size etc.

WN pricing is pretty average, you might want to browse Tire Rack, and Tires.com for some other choices.

IMO, it might be a good idea to stick with name brands that are carried by more than 1 or 2 vendors in case of damage or curbing.
 
No!! I have a 2004 for Mazda3 hatchback i took off the 17' rims and put the 18' rims on the there and they make my tires rub when there is too much weight in my car or when we hit a dip it's real bad so i wouldn't do it or if you do it better get your car raised a little good luck!! Hope that helps!
 
Last edited:
No!! I have a 2004 for Mazda3 hatchback i took off the 17' rims and put the 18' rims on the there and they make my tires rub when there is too much weight in my car or when we hit a dip it's real bad so i wouldn't do it or if you do it better get your car raised a little good luck!! Hope that helps!

lol at the 7-year-old thread advice! THIS THREAD IS FROM 2004!!
 
Back