what should my boost be?

[ms6acton]

so i just installed my dash hawk and it shows my boost spiking 15-16ish holding 13-14ish.. its never consistent and jumps around everywhere.. i thought it was suppose to be spiking 18 holding 15? i have the forge bpv on and checked all my connections. no other engine mods. anyone got an idea?

 

[tunersteve]

What's the setup of your Forge? Blue or yellow spring, how many shims? What other mods do you have?

All of that factors in for boost readings.

 

[ms6acton]

blue spring 2 shims.. and no other motor mods..

 

[tunersteve]

You're probably about right then. I was spiking to 18 with the CAI, but now I can easily spike to 19 or 20 with the inlet installed.

 

[bova80]

if you are holding 15psi you are fine. it doesn't need to spike and if its not then thats good.

 

[vrspeedemon]

I'm running yellow spring no shims and spiking 18-20ish...but holding around 15.5ish...maybe take out shims????
I am experiencing some pressure release in high gears with yellow spring and am thinking about switching to blue.

 

[coyfish]

Before I had my TMIC i was spiking 19 and holding 17-18 with blue spring + 2 shims.

 

[ms6acton]

if you are holding 15psi you are fine. it doesn't need to spike and if its not then thats good.

i wish i was holding 15.. im barely holding 13.. its all over the place

and im gonna try and change out the shims and springs and see if that helps

 

[coyfish]

Depends what gear ur in. If ur in 3rd or up and barely holding 13 u have a leak.

 

[ms6acton]

Depends what gear ur in. If ur in 3rd or up and barely holding 13 u have a leak.

i dont think it matters for us ms6 guys.. i k no the ms3 has some sort of torque regulator but not us. and its all gears that isnt holding

 

[ms6acton]

also im noticing boost at super low rpms.. have to do with the same problem?

 

[coyfish]

Well you can generate boost at any rpm depending on how hard you press the accell. Im still trying to figure out why your only holding 13 psi though. I mean its not terrible but it should definately be higher. Have you checked all your hoses and clamps? Check the T on your boostgauge as well if you have one.

 

[ms6acton]

i dont have a boost gauge, just using the dash hawk. and ive checked all the hoses like 5 times. i talked to a service guy at mazda but he was less then useless. if i have time tomorrow/if i remember ill do some runs on the dash hawk and toss em up here

 

[bova80]

log boost, abs throttle position, rpm, actual afr and wastegate dc %

 

[ms6acton]

cool.. will do

 

[ms6acton]

so i went out and did some pulls in 2nd 3rd and 4th but only one of them saved. ill go back out later and do some more, i have family over right now so i cant. also, how do i load them onto here? photobucket or something?

 

[bova80]

you can just take a screen shot and either host them somewhere or attach them.

 

[ms6acton]

[/URL][/IMG]

 

[ms6acton]

i couldnt find the wastegate pid on my dashhawk. and i dont kno when ill be abel to go do another run. hopefully later tongiht once all the family leaves

 

[1quickturbosix]

I spike at about 21 or 22 and holds around 17. I must have gotten a good one or something.