What I ended up doing this weekend

Rogue

Red 5 Standing by
Contributor
:
2003 MSP
I was talking with Anarchistchiken the other day about his headlamps, and how I wanted to paint mine black. He said that if I came out, we could swap them because he wanted a new set of chrome one's to paint. So, I make the 2.5 hour drive out to Alabama Saturday evening, and meet him at Matty P's house. He was working on his exhaust. He just installed an OBX header, MAM midpipe, and a Magnaflow cat-back. He was having all kinds of problems with the MAM midpipe not fitting up correctly. Anyways...that's not the point of this story.

I came out Saturday to go the the drag strip with Matty to see what kind of times he would put down with his (unmentionable). I also wanted to see what kind of slow time I could put down. Matty called 3x to see if they were racing because it was raining here and the strip is about a hour north. Each time he called, they said they were running cars. When we get up there, they tell us it's gonna be about 30 minutes because they're having to dry the track. After 30 min it's still raining and they give everyone rainchecks. I tell them i'm from GA, and ask to have my $10 back. The guy was cool about it and gave me back my money.

Sunday rolls around, and Matty and I go get lunch, watch Transformers the Movie, then finally get started working on the cars around 2. He helps me remove my bumper and headlamp. Then comes up with an idea for a mod. [see attached pictures] Then he proceeds to start removing the plastic on the driver side fog light insert. While he's doing that, I proceed to removed the bumper and headlights from Anarchistchiken's car....who still hasn't shown up.

I get get his bumper and headlights off. While I'm putting my HID bulbs into the new black headlights....he finally decides to show up. Matty is still working on my grill insert; I'm struggling with the clips on the HID bulbs. I get the bulbs in and headlights mounted. Right as I'm about to start mounting my bumper....it starts to rain. Now where Matty lives, he doesn't have a paved drive way, so when you try to jack the car up...the jack just sinks into the wet ground. I'm stuck here.

Later on I go to dinner with Matty and his wife. On the way I see a DIY car wash place. "That's where I can put on my bumper," I say. So after dinner, we pack up my bumper in the back and drive to the carwash. When we get there I realize I left the screwdriver at Matty's. After some struggling we get the bumper on. I was going to drive home, but with the rain and being dark....i'm just waiting til Monday morning.

So what was planned to be a 24hr trip has been extended to 44hrs.
 

Attachments

  • grinding 1.webp
    grinding 1.webp
    58.6 KB · Views: 287
  • grinding 2.webp
    grinding 2.webp
    61.8 KB · Views: 291
  • grinding 3.webp
    grinding 3.webp
    52.5 KB · Views: 279
That sounds like it almost wasn't worth it. I can relate, seems like every modification I do to my car takes 5 times longer than it's supposed to.
 
Gaboost said:
That sounds like it almost wasn't worth it. I can relate, seems like every modification I do to my car takes 5 times longer than it's supposed to.

Know the feeling well myself... I've devised a factor to give you the actual time it takes to get it done. What is "15 minute bolt on" just double it or just triple it to be safe....never fails.
 
Haha, Luke, you noob. That's what you get for hanging out with rednecks such as Matty in Alabama. Didn't you know they haven't yet discovered asphault ;).

j/p Matt :D
 
Rogue Pro5 said:
I came out Saturday to go the the drag strip with Matty to see what kind of times he would put down with his (unmentionable).

Unmentionable......classic.(rofl)
 
Can you not say supercharger? I understand you can't say WOMP, but I would think supercharger is ok. But then again WTF do I know.
 
I_Boost said:
Can you not say supercharger? I understand you can't say [inappropriate comment removed by moderator], but I would think supercharger is ok. But then again WTF do I know.

i just wanted to make a statement about the whole thing... and want to stay out of trouble, too
 
good story luke but you left out the part where we were entering the resteraunt and you felt my ass up. Why leave out something so glorious??

p.s. I also finished your plastic inlet. All of the holes are clear and I've gone through and trimmed away the excess as best as possible. I had no idea it would take so long to remove that plastic.

p.p.s. Miller's car is STILL on stands out in my yard....wth?!?!

p.p.p.s. If it's not raining anymore today I'll get that support blasted and powdercoated for you. Shouldn't take too much longer.
 
Super Matty P said:
good story luke but you left out the part where we were entering the resteraunt and you felt my ass up. Why leave out something so glorious?? I actually forgot about that...

p.s. I also finished your plastic inlet. All of the holes are clear and I've gone through and trimmed away the excess as best as possible. I had no idea it would take so long to remove that plastic. Thanx Matty

p.p.s. Miller's car is STILL on stands out in my yard....wth?!?! Must be an Alabama thing. Better jackstands than cinderblocks

p.p.p.s. If it's not raining anymore today I'll get that support blasted and powdercoated for you. Shouldn't take too much longer.When are you going to Topher's? I can meet you there to pick everything up. Did you find my screwdriver?

reponse in red
 
Luke, where are the updated pics of your car?
(and where's the window tint? lol)
 
just got the tint wednesday. looks good. i'll try to get some pics. i don't have a digi cam, so it's hard to get them done.
 
Luke, I don't have the support brace finished yet. We've had some "complications" at my house involving a certain puppy that is no longer with us.

I'm actually heading over to Tophers first thing in the morning. I plan on being at his dealership by 11am your time. I'll bring the plastic gaurd and the screwdriver. If I can I'll get that piece finished tonight.

Sadly our furnace (only 1 yr old) has gone out for 2 days so we've had no heat and 40* nights.....
 
Back