CheeseHelmet
Member
Hah, I bought the same one (I leave in my trunk toolbox). It actually cost me less to buy one of those then to have my car scanned once at a local garage.
What have you done to your P5 today?
- Thread starter Tg5
- Start date
Hah, I bought the same one (I leave in my trunk toolbox). It actually cost me less to buy one of those then to have my car scanned once at a local garage.
ScratchNSniff
Undisputed Parts God
- :
- Way to Many
Can you guys not rent parts?
CheeseHelmet
Member
Canadian Tire rents some stuff but nothing electronic (they charge $60 to get your car scanned). Also, they only let you keep the tools for 3 days and rarely have anything in stock. You Americans don't know how good you have it
ScratchNSniff
Undisputed Parts God
- :
- Way to Many
Lol...I paid $300 to rent the scanner they sell for $250, but I get every bit of it back...and I have had it for almost 4 weeks...
CheeseHelmet
Member
You don't need to rub it in
I was at advance auto (in Vermont) a few months ago with my brother to buy some struts and the guy had no problem lending us a spring compressor for 3 months(!) even after we told him we were going to take it out of the country.
are these tough to put on? i need to order some and change mine out to get rid of rainy day squeaking.
CheeseHelmet
Member
It's a really easy job. I'd recommend removing the cruise control actuator (2 10mm nuts) and moving it to the side for easier access to the alternator tensioner.
You must be careful not to over-tighten the belts as that can cause premature bearing failure, amazon has belt tension meters for $20.
im sure autozone will let me rent the tool for that.
anyways i just ordered 4 new motor mounts off ebay to put inserts in. cant beat getting 4 mounts for $117 shipped! CheeseHelmet, when i get the box in i can weight it and take the dimensions to see how much it would cost if i bought you a set and then shipped a set to you in canada if you want. prob less than that outrageous $225 or whatever for shipping from the ebay seller
anyways i just ordered 4 new motor mounts off ebay to put inserts in. cant beat getting 4 mounts for $117 shipped! CheeseHelmet, when i get the box in i can weight it and take the dimensions to see how much it would cost if i bought you a set and then shipped a set to you in canada if you want. prob less than that outrageous $225 or whatever for shipping from the ebay seller
CheeseHelmet
Member
Hah, no need. When I order stuff from the US I have it shipped to a forwarding company so I don't get ripped off on shipping. Also, My mounts are all good except for my passenger one (which I just ordered from rockauto).
Thanks for the offer though
Signature Sound
Banned
- :
- stock G15
I heard good things about the stock MSP oil cooler too, but I went with a Setrab. Something is better than nothing.
Heres the list. I will PM it to you too:
oil system parts list:
-WITH DocB Oil Pump and PRV-
oil filter relocation kit ebay item# 330431388141
oil pressure gauge and sending unit ebay item# 270357091470
oil pump ebay item# 130328449925
stainless steel braided lines approx 15 to 20ft ebay item# 230397537751
4 pcs. AN-10 straight flare fitting sumitt racing part# SUM-220090B
4 pcs. AN-10 45 degree flare fitting sumitt racing part# SUM-220086B
2 pcs. AN-10 90 degree flare fitting sumitt racing part# SUM-220087B
oil cooler (Setrab is the best brand for the money) ebay item# 270575771116
FRAM part# PH8A oil filter (AutoZone or WalMart)
AN-3 turbo oil feed line sumitt racing part# EAR-63010148ERL
restrictor pellet ebay item# 220599799353
turbo feed fitting at relocator 1/8' NPT to AN-3 Flare sumitt racing part# AER-FBM2000
AN -10 turbo oil return line (use the left over from PRV)
AN -10 turbo oil return fitting at turbo sumitt racing part# SUM-220086B
AN -10 turbo oil return fitting at oil pan sumitt racing part# SUM-220086B
AN -10 oil pan fitting male weld in bung sumitt racing part# SUM-220062
-WITHOUT DocB system-
tee adapter sumitt racing part# EAR-991701ERL
coupler fitting to adapt tee to engine block sumitt racing part# EAR-991101ERL
AN-3 turbo oil feed line sumitt racing part# EAR-63010148ERL
restrictor pellet ebay item# 220599799353
turbo feed fitting at tee adapter 1/8' NPT to AN-3 Flare sumitt racing part# AER-FBM2000
AN -10 turbo oil return line (use the left over from PRV)
AN -10 turbo oil return fitting at turbo sumitt racing part# SUM-220086B
AN -10 turbo oil return fitting at oil pan sumitt racing part# SUM-220086B
AN -10 oil pan fitting male weld in bung sumitt racing part# SUM-220062
Water Feed System
-Including throttle body-
AN-6 braided hose from water neck to turbo top sumitt racing part# SUM-230610 (10 foot length)
AN-6 braided hose from turbo bottom to throttle body inlet
AN-6 braided hose from throttle body outlet back to water neck inlet
4 pcs. 1/2" hose clamp with end RUS-620193
2 pcs. water fitting banjo style at turbo ATP part#ATP-FTG-004
vacuum nipple for turbo wastegate/ boost controller
From ATP turbo:
FTG-QuickTap-CompHSG
Code: ATP-FTG-010
justanothermp5
Banned
- :
- Rust Bucket
well since cheesehelmet wanted pics of my interior, i took some today, not the greatest, but u get the idea
front two pillars are new fabric already
and new sticker i put on today lol
front two pillars are new fabric already
and new sticker i put on today lol
you have that exact model? hell for that price i mite even pick it up if it works decent enough
ScratchNSniff
Undisputed Parts God
- :
- Way to Many
I would like that decal a lot more if I haven't seen it all over the Civic forums...something like that is definitely not original at all IMO...
CheeseHelmet
Member
well since cheesehelmet wanted pics of my interior, i took some today, not the greatest, but u get the idea
front two pillars are new fabric already
and new sticker i put on today lol
Damn that looks pimp, Thanks!
I have one that looks exactly like that except it doesn't support the CAN-bus protocol. It works great, you can read/erase codes and check the status of your various emissions-related monitoring systems (no real-time monitoring though).
Yes, that exact model.
