What have you done to your MSP today?

[Velocifero]

Here's the How-To for the front pads/rotors
Here's the How-To for the rear pads and rotors, but I am not sure if the piston retraction is the same on this car versus the MSP. I have always used one of these, which you put onto the piston and turn it clockwise to push it back into the caliper.

you have to use that to retract the rear caliper piston on the MSP, P5s and regular sedans have a screw in back under another screw. The fronts can even be pushed in by hand if you have a decent grip, but any leverage works, or try a c clamp, or splurge $5 on a caliper brake retractor at Autozone

 

[livelyjay]

you have to use that to retract the rear caliper piston on the MSP, P5s and regular sedans have a screw in back under another screw. The fronts can even be pushed in by hand if you have a decent grip, but any leverage works, or try a c clamp, or splurge $5 on a caliper brake retractor at Autozone

Well crap. Oh well, I have the tool now so I might as well use it. I may experiment with the allen screw the next time I change my brakes though.

 

[MSP608]

went out n bought lugnuts for my drag radials today. previus best was 14.3 that was before i got my car tuned. ill do a few runs on street tires to see how much the tuning helped then throw on the d/r's for some real fun.

praying for no zoom zoom boom.(no)

 

[nazgul350r]

Got my car back from mazda, from fixing an oil leak. But before that I got a 3inch j pipe back w/ a magna-flow muffler and a monster flow cat.

 

[4drboost]

Finally got the AFC tuned! Its feelin good. Now I need my FMIC and brakes.

 

[Dpwhitehead1]

went out n bought lugnuts for my drag radials today. previus best was 14.3 that was before i got my car tuned. ill do a few runs on street tires to see how much the tuning helped then throw on the d/r's for some real fun.

praying for no zoom zoom boom.(no)

vids? what psi?

 

[livelyjay]

Finally got the AFC tuned! Its feelin good. Now I need my FMIC and brakes.

Got any dynos?

 

[MSP608]

vids? what psi?

didnt get the 14.3 on film. heres a couple vids tho
outside:
http://videos.streetfire.net/video/86a5fb12-dc92-4115-a0bb-992d00fd6c87.htm
inside with a passenger:
http://videos.streetfire.net/video/418881df-fe31-4ebc-8827-992d00f1bf64.htm

this was all on 10psi.

 

[RacerXGirl]

She's going to get a bath this weekend...

 

[livelyjay]

Looks like I'm not getting the car back till next week (blarf)

 

[Dpwhitehead1]

didnt get the 14.3 on film. heres a couple vids tho
outside:
http://videos.streetfire.net/video/86a5fb12-dc92-4115-a0bb-992d00fd6c87.htm
inside with a passenger:
http://videos.streetfire.net/video/418881df-fe31-4ebc-8827-992d00f1bf64.htm

this was all on 10psi.

nice man. looks good. i love the interior shots.

 

[MSP608]

today i washed the car, and did a 13.6 in the 1/4 at 101 mph! car felt great tonight, the drag radials helped a ton. i did a couple runs on street tires to see how much tuning helped and best i did was a 14.0 @ 100. thats 3 tenths off my previus best, tuning ftw!

ill upload the vids tomorrow.

btw this was all at 10psi.

 

[Mazda]Speed]

question...?

i just bought me a boost controller. adjustable fuel regulator for my MSP 3.5and im also gonna get a fuel pump...how much would i be able to boost without having anything mess up in my car? and another question how many cc's is stock injectors for tha MSP?

 

[Mazda]Speed]

So I thought if the P5's could have one of these we could to. Hopefully there are enough people doing things to their MSP's to keep this going. Ill start.

I finally got tired of my ghetto looking dual gauge pod and spent the money on a full a-pillar (thanks Street Unit (first) ). I'm going to paint it whenever I can get hold of some of the Krylon #3551 Classic Gray and then put it in. Im pretty sure everybody will be able to tell which is the old and which is the new. I hope to have pics of it installed by the end of the week.

hey man can i get tha website that u ordered tha pods from. ive been searching for them for awhile and havent came across them...if u can help. thx!!!

 

[drdking]

Had my exhaust fall off its hangers in the middle of a lap durring Club Trials...

 

[CnoTataymo]

Since I'm still jet lagged from when I arrived from the Philippines since Tuesday morning, I went in my garage and fixed my rear lip.

 

[Dpwhitehead1]

today i washed the car, and did a 13.6 in the 1/4 at 101 mph! car felt great tonight, the drag radials helped a ton. i did a couple runs on street tires to see how much tuning helped and best i did was a 14.0 @ 100. thats 3 tenths off my previus best, tuning ftw!

ill upload the vids tomorrow.

btw this was all at 10psi.

very awesome..glad to hear it. i look forward to the vids.

 

[terbow]

today i drove my car! woo hoo!

new pictorials.

new charge pipe by turbohoses, and ms3 bypass valve (customized for moi)

 

[msp03.5]

today i washed the car, and did a 13.6 in the 1/4 at 101 mph! car felt great tonight, the drag radials helped a ton. i did a couple runs on street tires to see how much tuning helped and best i did was a 14.0 @ 100. thats 3 tenths off my previus best, tuning ftw!

ill upload the vids tomorrow.

btw this was all at 10psi.

Thats awesome man! I can't wait until the day I am in the 14s let alone the 13s (I am in colorado also, altitude FTL)

 

[terbow]

now i know altitude messes with things, but cant u adjust ur tuning to compensate?