2003.5_MSP
Member
- :
- 2003.5 MSP
Your doing that on the stock studs correct? No studs built into the spacers? If so I think I'm going to get same size all around
What have you done to your MSP today?
- Thread starter baconbitz
- Start date
Your doing that on the stock studs correct? No studs built into the spacers? If so I think I'm going to get same size all around
2003.5_MSP
Member
- :
- 2003.5 MSP
Do you have any pics with it 8mm front and 5mm rear?
So do you still have the stock RH and are you lowered.. So your running 8mm all around now?
Last edited:
2003.5_MSP
Member
- :
- 2003.5 MSP
Thanks man... I think I'm going with 8mm all around
I felt like running 8mm on stock studs would be pushing it. With the 6.7mm's I felt like there was just enough thread on there to be comfortable. I do have 15mm spacers with the built in studs sitting around, if I have time this weekend, i'll slap a pair on the front and move the 6.7mm's to the back. But yea, 8mm around will be a very nice improvement.
2003.5_MSP
Member
- :
- 2003.5 MSP
I heard bout that.. But anyway I was going to get longer studs with 8mm
did you always check to make sure everything was torqued properly? i check about once a week.
- :
- 03.5 YLW MSP
Selling a 38mm v-band EWG, stock placement exhaust manifold with no EGR
http://www.mazdas247.com/forum/showthread.php?123818387-ThePope-Exhaust-manifold&highlight=
Turns out I had a code of P0505(i think) and my connection appeared to just be loose. Replugged the IAC back into the harness and all appears to be fine.
http://www.mazdas247.com/forum/showthread.php?123818387-ThePope-Exhaust-manifold&highlight=
Turns out I had a code of P0505(i think) and my connection appeared to just be loose. Replugged the IAC back into the harness and all appears to be fine.
KARMA IS A b****.....
When I first bought my MSP, I observed everyone still rocking stock RH's with mildly-fully built MSP's. Im a wheel ***** so I thought to myself "I HATE RH'S, THEYRE STOCK! "I DONT NEED THEM!" Guess what, Now that MSP is parked and being rebuilt. I want to take off the Maxxim's so they dont rust/warp or tires get flat spots....
HAHAHAHAHAHAHAHA FML! 15" Toyota FREEBIES
And also, we all know who's built/blown the most motors and has tons of parts laying around.... Sucked up my pride...... Gotta love the MSP
When I first bought my MSP, I observed everyone still rocking stock RH's with mildly-fully built MSP's. Im a wheel ***** so I thought to myself "I HATE RH'S, THEYRE STOCK! "I DONT NEED THEM!" Guess what, Now that MSP is parked and being rebuilt. I want to take off the Maxxim's so they dont rust/warp or tires get flat spots....
And also, we all know who's built/blown the most motors and has tons of parts laying around.... Sucked up my pride...... Gotta love the MSP
Wagonbacker9
Member
- :
- 2004 'Hoe
15' will cover you with some extra if you're running individual lines, if you're T-ing off of a single line, then about half that much.
Awesome, thanks! I figured I might as well replace all the vacuum line while I'm already in there to keep it up to date. Do you know where I could find a diagram or something that shows all the vacuum line necessary?
Wagonbacker9
Member
- :
- 2004 'Hoe
I just used the line that was there as a template, and winged it for the rest. As long as you pay attention and do it a step at a time its really impossible to screw up.
Yeah, just some of the line isn't labeled as vacuum or fuel so it's kinda hard to decipher at times. But thanks for the help!
