Turbohoses SMIC Results

[Turbohoses]

What about the other two? Put me down. I can paypal the $$ on Sunday.

The other two have yet to be taken.

It's best to contact us directly.

Turbohoses R&D

 

[CChris704]

might be able to count me in on the oct one....do we have a price y et?

 

[jaxmsp]

We can not speak for the CS Intercooler, it is not our product and we did not test it. Remember, our tests were done with our piping which is aluminum, the cooler air temp. "maybe" one reason. Flow characteristics are another case, again, I can not comment for the CS intercooler.

Turbohoses R&D

were the stock plastic pipes used when the stock intercooler intercooler was dynoed?

 

[Turbohoses]

were the stock plastic pipes used when the stock intercooler intercooler was dynoed?

Our pipes were used with the OEM ic during the tests.

Turbohoses R&D

 

[MazdaDryvr]

The HP gain from an FMIC is only a few HP more than this SMIC isnt it? I thought I recalled seeing a 18hp gain from Ions FMIC. Correct me if I'm wrong.

 

[slyydrr]

price... without a price estimate, im losing all interest in one of these... its getting rather cumbersome to keep asking repeatedly.

 

[Rawyzf]

Price!

price... without a price estimate, im losing all interest in one of these... its getting rather cumbersome to keep asking repeatedly.

 

[Turbohoses]

price... without a price estimate, im losing all interest in one of these... its getting rather cumbersome to keep asking repeatedly.

Please contact us directly.

Turbohoses R&D

 

[wickedjra]

has anybody contacted them directly yet?? care to post their quoted price?

 

[Bhamsan]

has anybody contacted them directly yet?? care to post their quoted price?

Ditto.

 

[Rawyzf]

Ditto

Ditto.

 

[speedhawaii]

watsup with ignoring that question

 

[ONRAILS]

You guys are going to hate me for this... I called earlier today and got the price, but I cannot remember the exact quote he gave me. I know it was $600+. That turned me off right away. But I suggest you call them up just to verify... I could be wrong.

 

[srd555]

I called, they asked me not to say the price until its released but I can give the range. Its greater than $590 but less than $600 (wink) It would have been $100 more if the fan screw they talked about was kept in the desgin.

 

[speedhawaii]

are u f*cking kidding haha. circuit sports isnt gonna get flamed for their price haha. nm about this drama on SMIC. custommsp has 465 shipped i think but its tube and fin. check it out

 

[Turbohoses]

are u f*cking kidding haha. circuit sports isnt gonna get flamed for their price haha. nm about this drama on SMIC. custommsp has 465 shipped i think but its tube and fin. check it out

The demensions of our competitors cores/sizes are more than likely different, which will make a difference in the flow rate. Basically, this is not a apples to apples comparison, considering that there are differences in the core, size, testing etc..

Turbohoses R&D

 

[speedhawaii]

yes i must admit thats true. its a nice design and good stats, but sorry its too expensive for me.

 

[StreetUnit]

Hello guys, I had to read up on 5 pages to get back up to speed. We are up and running here and ready to get back into the swing of things. Thanks for all the voicemails to see if we were alive...

SMIC is $595 plus shipping
These units will be produced in 5-8 allotments per month
Due to this being a limited unit and the extensive R&D invested, there will not be a GB, however, I will discount the piping kits to whomever buys the piping and SMIC as a kit.

First production run will be ready to ship in 3 weeks (approx Sept 12th)

Orders must be called in and MUST speak with me. There will be 5 spots available on the first production run. Once those fill, 5 more spots will be open for the second production run and so forth.

First come, first served basis.

 

[MazdaSpeedSter]

OMG!!! Thats expensive!!!
~ Anyways, when are the intake going to be out? Is there a discount if I purchase the intake along with the hard pipes. Also can there be a GB on them (hard pipes and intake)?

 

[mspeed101]

So basically the smic and hardpipes will cost over $1000 shipped????? Are you kidding me? I guess im gonna have to stick with the hiboost fmic