if i were to get there DP for my car is there anything else i should get to compliment it like a boost controller or anything?
http://www.turboxs.com/item.php?ID=259
http://www.turboxs.com/item.php?ID=259
turbo xs DP
- Thread starter RuZec
- Start date
yeah. you'll blow your engine according to gofast.
but i was just being sarcastic about the mid pipe. you won't really need anything else.
oh...well...to play it safe, you might want to pick up another gasket that goes between the dp and the turbo. mine was fine after 27k, but still...it might be broken and the last thing you want is to find out the gasket is broken and you have no way to get to the store.
otherwise, you'll need a hell of a tool set, pb blaster, an o2 socket wrench and some anti seize
but i was just being sarcastic about the mid pipe. you won't really need anything else.
oh...well...to play it safe, you might want to pick up another gasket that goes between the dp and the turbo. mine was fine after 27k, but still...it might be broken and the last thing you want is to find out the gasket is broken and you have no way to get to the store.
otherwise, you'll need a hell of a tool set, pb blaster, an o2 socket wrench and some anti seize
you're an idiot. reread the proper thread and process what i am saying. you are completely wreckless to suggest to somebody to throw on a downpipe and not mention that MOST dealers will VOID warranties with a downpipe or to not even monitor whats going on with a dashhawk or other device.
do you have a dashhawk?
what are you going to monitor? there's no egt pid.
i dont' give two s**** about this guys warranty. and an intake and an aftermarket valve are more reason to void a warranty than a downpipe.
Last edited:
AllLostThings
Member
- :
- 2007 Mazdaspeed 3
Honestly man if you're going to get the Downpipe you might as well do the test/mid pipe also.
if that doesnt sum it for the op, then i dont know will
yeah, i don't know will either.
i don't understand your point. he should already be thinking about warranty.
why do i have to warn him about warranty when he's asking about parts?
by me saying that i don't care about his warranty, what does that prove?
furthermore, you didn't answer my perevious questions.
do you own a dashhawk?
what are the pids to monitor when purchasing a downpipe?
you seem to talk a lot of talk, but know nothing about walking the walk. you seem to read a ton of information, and regurgitate it. go get some experience and then debate me.
also, your post is missing the word, "what" as well as some apostrophes.
Last edited:
no...dp is a pain in the ass if you ask me. i put mine on there and don't plan on taking it off. **** that.
although, aaronc7 or whatever the **** his username is will tell you dp isn't that bad and that he's swapped his at least 3 times.
i'll just tell you that it was a pita for me
although, aaronc7 or whatever the **** his username is will tell you dp isn't that bad and that he's swapped his at least 3 times.
i'll just tell you that it was a pita for me
you should get a dh if you want to monitor stuff. a dashhawk is a great tool that plugs into the obdii port on the car. it reads a lot of stuff from the ecu, including afr, boost, knock retard, fuel trims, fuel pressure...etc etc etc
it can also read and clear dtc's (diagnostic trouble codes) as well as datalog.
i have a boost gauge and dh since my standback is lying to the computer. that means my boost reading on the dh is not correct
it can also read and clear dtc's (diagnostic trouble codes) as well as datalog.
i have a boost gauge and dh since my standback is lying to the computer. that means my boost reading on the dh is not correct
Oh ok.. Ill read into the DH more.. I always see it but havent it paid it to much attention. Sounds alot easier to deal with when it comes to installation.
Im about to call and place my order for my cobb SRI and Forge BPV.. Wonder if theres something else I need?!?! 0_o
Im about to call and place my order for my cobb SRI and Forge BPV.. Wonder if theres something else I need?!?! 0_o
If you want to talk about mods, feel free to call me. I could go over all the things I have personal experience with.
pm me if you are interested.
