Turbo System Switch to MAM 2nd Gen Streeet Sleeper Kit

[LinuxRacr]

That's right, I'm fixing to change it up again to get the car running the way I want once and for all! Stay tuned for updates and pictures..

Here's a preview:

 

[CitizenPro]

Ohhh Shhhiet! (shocked)

....Discreet And I will be heading up there this weekend, hope to see u guys.

 

[lasermp5]

oh god... here we go again. Best of luck man. Get'r done once an for all!

 

[LinuxRacr]

I plan to. I already modified my turbo and cut this weld (pictured below) so that I can run internal wastegate again. Now I just need to clock it the right direction.

 

[LinuxRacr]

The rest is coming together. If 5 PSI can make 180 HP, I'm hoping that 16 PSI will make me proud!!:

Thanks ebmp5!!!

 

[LinuxRacr]

I re-clocked the turbo to accomodate the new turbular manifold, but need snap-ring pliers to clock the compressor side of the equation. In the picture below, you will see that the actuator rod for the wastegate is not lined up with the gate.

 

[ebmp5]

The rest is coming together. If 5 PSI can make 180 HP, I'm hoping that 16 PSI will make me proud!!:

Thanks ebmp5!!!

NO DOubt man!!! good luck hope u have fun and let me no what kind of power u get after 7psi so sad that i didn't go past 5psi. i bet when u get that bar going u gonna see some crazy number's.

 

[MAM CS]

Good luck with the turbo setup. 16psi should put you in the 300whp range on pump gas and a good tune.

 

[LinuxRacr]

Good luck with the turbo setup. 16psi should put you in the 300whp range on pump gas and a good tune.

Thanks. Did you get my PM?

 

[bazooka joe]

that mani is a work of art!!

 

[Jeph]

Good luck, your cars been through more turbo kits than any other...

 

[avarela86]

Gonna look damn nice. I love that MANI.

 

[LinuxRacr]

Turbo clocked. I still need to get my hands slim-line SPAL fans, and a couple of replacement gaskets.

 

[dominoy2k1]

what are you doing with your old setup? i think i have a 9inpuller if you want it.

 

[LinuxRacr]

Yeah, I definitely need the Spal 9 inch puller. I also need a SPal 12 inch puller. You have PM.

 

[LinuxRacr]

what are you doing with your old setup?

The old setup is going up for sale. Just the manifold, downpipe, and Tial Wastegate.

 

[LinuxRacr]

Fans Procured

Thanks to Carlos (dominoy2k1) for coming through with some fans! I hooked up the mystery 12 inch fan (I don't know where it came from!!) to a portable 12 volt battery. It almost blew my shirt off!! LOL! I haven't tested the 10 inch Spal yet, but I am asured that it works. Here are some pictures:

 

[avarela86]

Thanks to Carlos (dominoy2k1) for coming through with some fans! I hooked up the mystery 12 inch fan (I don't know where it came from!!) to a portable 12 volt battery. It almost blew my shirt off!! LOL! I haven't tested the 9 inch Spal yet, but I am asured that it works. Here are some pictures:

I need those to cool my baby. How is everything up there my amigo.

 

[dominoy2k1]

no problem. i do what i can to help people out. glad that fan worked.

 

[LinuxRacr]

I just checked the part number on that Spal fan you gave me. It is actually a 10 inch SPAL fan (VA11-AP8/C-29A) or (30100360). Do you know where the 12 inch can came from? It says "Hayden Automotive" on it.