Stretch wheels and tires for a Mazda 5

[T dawg]

Have the chance to buy ties and rims for my Mazda 5. Everything matches up to fit except the width of the rim which is 9 inches. The offset is 20mm. I dont mind the tires pushing out a bit further but I'm concerned what issues I could encounter(rubbing etc). I just want to bolt them on and go . Should I just go and mount one of them and physically see what happens when I turn the wheel?

Any advice would be appreciated.

Thanks

 

[njaremka]

+20 offset is going to rub like, well, yeah. you'll need a bunch of fender work to get those to fit.

sock wheels are 6.5" wide and +52 offset.

 

[T dawg]

Thanks. That's not what I want to do. The search continues.

 

[757Premacy]

Compared to your existing wheel, this new wheel will have an inner rim which is 1.3mm further away from the suspension strut. The outer rim will poke out 64.8mm more than before.

 

[Bori_xb]

So what would be the ideal specs to stance the MZ5?

 

[757Premacy]

So what would be the ideal specs to stance the MZ5?

Depends on the diameter of the rims and wheither you want to roll your fender, add camber, plus how much you're going to lower the 5