SRT-4 intercooler

[Spooled]

Agreed, not easy, but there are a lot of good shops here in Detroit that can do it.

 

[dominoy2k1]

its easy. just takes alot of time and patience.

 

[protegeV]

to most people, patience and ease dont go together

 

[SpoolinMsp]

its easy. just takes alot of time and patience.

Also very true, when doing your own custom piping.

 

[msp35]

Bump for an old thread. Search does work!!

So has anyone used the SRT4 FMIC yet? I too have noticed quite a few for ~150.

 

[sickspeed94]

i measured yesterday, the largest height without cutting is 6 inches ~

 

[msp35]

And the Ion was what 26x6x3?

Sorry man but that still doesn't answer the question of whether or not it'll work, or for that matter, if anyone has tried it????

 

[sickspeed94]

i don't know if it will fit but of corse i'tll work, as long as it's plumbed properly. what are the dimensions of a stock one and i may be able to tell weather it'll fit.

 

[msp35]

There is one on ebay. He says the rough dimensions are 26x6x3.
I am sure that the dimensions will fit, but was just curious as to if anyone has actually tried it, and what the results were. If not I may just be the first.

-1

 

[CChris704]

well msp35, let me know if it works and where you went to have the pipes done and i might also do it at the same place.

p.s. good luck if you try it.

 

[sickspeed94]

i'll be trying it too probably because i think i can get a hold of an SRT core...

 

[1FASTMP5]

i have my stock srt-4 intercooler id be willing to part with. it only has 2,000 miles on it....it's perfect.

 

[msp35]

Well, honestly I'd rather buy from someone here than SRTforums anyways. How much do you want for it? Can you email me a pic or post here....timmy_60957@yahoo.com?

Since it is getting warmer here I have noticed sever heatsoak since messing with that spring resistance mod.....time for upgraded IC.

Thanks.

 

[1FASTMP5]

Well, honestly I'd rather buy from someone here than SRTforums anyways. How much do you want for it? Can you email me a pic or post here....timmy_60957@yahoo.com?

Since it is getting warmer here I have noticed sever heatsoak since messing with that spring resistance mod.....time for upgraded IC.

Thanks.

i sent you a pm.

 

[msp35]

replied.

 

[Spooled]

Please keep us up to date with this. There seem to be a lot of SRT-4 owners that upgrade and are willing to sell their FMIC for a good price. Also, I'd love to see a list of tube sizes and silicone couplers/humps that are needed. DIY SRT-4 FMIC thread would be ideal for the budget modder. Good luck!

 

[msp35]

That is exactly what I would work on. But, I am not sure if I'll personally piece together piping. I am thinking of a local exhaust shop "Redd's Muffler" in Urbana to either bend some pipes, or I'll buy various bends and have them use that.
Then of course have the inlet/outlet moved from back to the sides. I awaiting pics right now for an IC.....ahem!

 

[7dollarbill1]

go to ebay and you can get one for less than $200 with the end tanks where you want them core legth with end tanks 28'' hight 6'' a little onthe small side width wise it's 2 3/8 outlet abd inlet size 2.75 this sholud work u just have fit it right

 

[msp35]

Thanks for the numbers. You should check SRTforums. many up for ~120-150shipped. I waiting for pics from a member here though first.

-1

 

[jeffmsp]

why is the srt fmic so cheap ? poor flow or cooling ability?