split second bug ??? WTF help !

[felix1]

hello, when i try to load the supermap stock, that i dl/ here, when i open it, i only see 9 and 10 !! what ever the map i am loading like i tried many other, and there is only always 9 and 10 !!! now my car cant even go in boost it just buck and lean the **** to hell, any idea of what is going on ?

 

[felix1]

help ? is there any procedure to do WDF, even without the AFC the car run better and yesterday it was working ? duh

ok, after some test now i know the problem is the afc itself, when i unplug the vacuum hose, the car stop having hudge hesitation but still running too lean at 14-15 on boost, whats up with my afc dam it !

 

[felix1]

all i did was to try to upload the supermapstock again to the afc, and now idk what is going on, i tried to disconnect the battery but didnt change something, i have no check engine, and the only thing i did was to unscrew 4 bolt and remove the cover of the AFC ? 0-o

 

[felix1]

40 view and no responce?

 

[Spiced MSP]

what is the overpressure set at under options? At what psi does the 10 change to 9? A value of 10 has no change to the fuel map. Anything under 10 takes away fuel and above 10 adds fuel.

 

[felix1]

Well the value are the same as the supermap stock u can find in the thread of map in the forum here, i didnt touch anything else beside loading the supermap back, like i said my car was running fine yesterday!! Near perfect at 12:1 with 8 psi.. They start to change at 6 psi i think! But i have the feeling the the cr is staying in open loop, its wierd , when i unplug the vacuum hose on the afc the car will run like a normal msp with some hesitation at 3000 rpm, but with the afc plugued, my wide band go top lean ( aem uego ) normally without afc it goes top rich its just wierd,

 

[felix1]

At what overpressure should be, i didnt touch at this , so it should be normal

 

[felix1]

how come when i try to load any map, there is no number after the .

all i see with the supermap is only 9 and 10 nothing else !!! this is not normal ...

 

[Sport23]

Have you tried loading the R4 software on another computer? Maybe it's just a display issue where the columns aren't wide enough on your pc or the font is too large?