SPICYTARZAN Build Thread!!

Sub, It looks good.

( I have a stock oil pan in much better shape than that one in my basement if you need. Try to get one closer to save on shipping, but the offer is there)
 
Thank you for the offer bro but Signature hooked me up with my oil pan.
20130123_213355.jpg
[/IMG]

20130124_223518.jpg
[/IMG]
 
Last edited:
Alright so im having a sensor issue somehwere. when i start up the car idles real low and dies.try hitting the gas just slightly dies right away. does this 2-3 times then i can give it some gas and it warms up and drives just fine perfectly better than ya could imagine. ive done some looking around but im getting mixed answers and cant really narrow it down to a couple things.
 
Alright so im having a sensor issue somehwere. when i start up the car idles real low and dies.try hitting the gas just slightly dies right away. does this 2-3 times then i can give it some gas and it warms up and drives just fine perfectly better than ya could imagine. ive done some looking around but im getting mixed answers and cant really narrow it down to a couple things.


Check your MAF sensor and/or all the wires going to ALL your plugs in the engine bay, that's where I would start... It's probably just a wire off or a plug you forgot to put in .
 
Hey guys haven't posted in a Long time but I've got some big things coming. Haltech will be on it's way soon. Then it's on to the exterior upgrades rims, coils, front lip and some others
 
sweet. Sam from cross over auto, posted on the protg FB pages, a stock turbo msp did 234whp and 245wtq on 8.4psi of boost using a properly tuned haltech from PA.
 
Ya when I do the haltech I'll also be doing 440cc injectors k-series Honda coil pack and turning the up to 15.
 
Back