Sign here if you want to be on the MI area PM event list

[simdrew]

1. tunersteve
2. jdub260
3. Albert
4. Yaggie1
5. SlideWRX
6. Xcelr8to1320
7. goldwing2000
8. jaw307
9. blackmica3
10. Winty87
11. neit_jnf
12. jonlong
13. Turbotom
14. DaveB
15. Joe RX-8
16. Japan8
17. kfcuno
18. jflash
19. jfvhpilot
20. Will P Rob
21. Entense
22. Bluesultan
23. Perro del Sol
24. mica3speedy
25. Michiganspeed
26. silverpro5
27. Andrewsmc
28. simdrew

 

[winty87]

I just hope we can get this many guys if not half of the people on this list to show up at the first meet of the year.

 

[silverpro5]

Depends where it is

 

[winty87]

Depends where it is

We meet out at whitmore lake south of brighton and we roll all the way to stockbridge then turn around.

 

[Yaggie1]

Hey Silver, from 96 and the Beltline you are looking at about 1hr 45 min give or take a few minutes.

Depends where it is

 

[jdub260]

Well I ordered my new tires today, Falken RT-615 225/40R18. $556 shipped to my door. I should have them in a week or so. After that I just need to get all the rest of the parts in my sig installed and then we can drive.

 

[winty87]

Well I ordered my new tires today, Falken RT-615 225/40R18. $556 shipped to my door. I should have them in a week or so. After that I just need to get all the rest of the parts in my sig installed and then we can drive.

Could you buy me some new toys too?

 

[goldwing2000]

After that I just need to get all the rest of the parts in my sig installed and then we can drive.

Nothing on the list looks especially difficult. Lemme know if you need any help. You already have the front sway bar done, so the worst of it is over!

 

[jonlong]

ordered wheels and tires today!

 

[jdub260]

Nothing on the list looks especially difficult. Lemme know if you need any help. You already have the front sway bar done, so the worst of it is over!

I'm glad I got this in writing.

The rear swar bar is a ROYAL PITA!!!!! and to make it even harder I can't unbolt the mufflers to get the exhaust out of the way because I dont' have them anymore. I have a single pipe from the cat all the way out the back. So this will make it harder because the rear sub-frame can't be dropped. I did find a walkthrough that removes the drive shaft from the rear diff and drops the rear diff out of the way and they did it all without removing the exhaust but it sounds like at least a few hours worth of work.

So Kane if your still down name the weekend and I'll buy the pizza and beer.

I have to get all the parts on before the weekend of April 22. That is the first SCCA event of the year.

 

[jaw307]

I got dibs on mounting the azenis, yall can have fun with the sway bar

I'm glad I got this in writing.

The rear swar bar is a ROYAL PITA!!!!! and to make it even harder I can't unbolt the mufflers to get the exhaust out of the way because I dont' have them anymore. I have a single pipe from the cat all the way out the back. So this will make it harder because the rear sub-frame can't be dropped. I did find a walkthrough that removes the drive shaft from the rear diff and drops the rear diff out of the way and they did it all without removing the exhaust but it sounds like at least a few hours worth of work.

So Kane if your still down name the weekend and I'll buy the pizza and beer.

I have to get all the parts on before the weekend of April 22. That is the first SCCA event of the year.

 

[tunersteve]

ordered wheels and tires today!

What did you get, and where did you get them from?

 

[Yaggie1]

Hey Steve, when you picking up an MS3 ?

 

[jdub260]

I got dibs on mounting the azenis, yall can have fun with the sway bar

I plan to get those mounted when I get my alignment in the next couple of weeks. I want to get them filled with nitrogen to help keep a steady PSI when I race this summer.

But you help is more than welcome on any other part, including the sway bar.

 

[goldwing2000]

I'm glad I got this in writing.

The rear swar bar is a ROYAL PITA!!!!! and to make it even harder I can't unbolt the mufflers to get the exhaust out of the way because I dont' have them anymore. I have a single pipe from the cat all the way out the back. So this will make it harder because the rear sub-frame can't be dropped. I did find a walkthrough that removes the drive shaft from the rear diff and drops the rear diff out of the way and they did it all without removing the exhaust but it sounds like at least a few hours worth of work.

So Kane if your still down name the weekend and I'll buy the pizza and beer.

I have to get all the parts on before the weekend of April 22. That is the first SCCA event of the year.

Oooo... forgot that you were AWD. I retract my previous ststement about it being easy. I'll still help ya if I can, though.
A hoist would come in pretty handy. Know anybody with a shop?

 

[tunersteve]

Hey Steve, when you picking up an MS3 ?

I should be getting one within the next few months...getting one of my credit card bills paid off first, and my parents finally got their new car, so we've got a spare, so I can put mine up for sale now.

 

[Will P Rob]

So where is the meet going to happen?

 

[Yaggie1]

^^ Are you talking about the install portion of the meet ? I don't know that we have actually firgured that part out yet ............

 

[jflash]

anyone wanna do a dyno day or meet at milan?

here is a place im going to check out for dynos.


http://www.tuningfactoryinc.com/services.html

 

[goldwing2000]

anyone wanna do a dyno day or meet at milan?

here is a place im going to check out for dynos.


http://www.tuningfactoryinc.com/services.html

Why would you go all the way out to Farmington Hills when you have a dyno tuning shop right in your own city? (scratch)
http://www.turbochargedpower.com/livernois_motorsports.htm