Rear Shocks/Struts??

[pwrpf01]

Well, I don't know enough about my 2009 Mazda5 (and it isn't w/ me to look) but I know I need to replace either the rear shocks or struts soon. I had a light oil leaking onto my driveway from under the driver-rear side. And now, the clunk I hear while driving confirms it needs replaced. Can anyone tell me which of these I need to get? I called AutoZone and Napa Auto and they say there are no 'rear struts' in their system for Mazda 5's, that I'll have to go to the dealer. PLEASE HELP!!!

 

[Wishmaster]

Get your search on... many threads on this forum about replacement/issues/DIY/Brands etc, etc... to clear a couple things up for you... there are no struts on the rear, just shocks, the OEM's are crap, buy aftermarket, the good thing is that they are cheap and if you're at all handy, have some tools, jackstands and maybe a garage are fairly simple to swap out yourself. While your at it you may want to have a look at your rear sway bar bushings... usually need changing by the time a shock goes, also very cheap and easy to DIY... also many threads on this forum. Have fun!

 

[pwrpf01]

thanks a bunch!!

 

[Robotazky]

Well, I don't know enough about my 2009 Mazda5 (and it isn't w/ me to look) but I know I need to replace either the rear shocks or struts soon. I had a light oil leaking onto my driveway from under the driver-rear side. And now, the clunk I hear while driving confirms it needs replaced. Can anyone tell me which of these I need to get? I called AutoZone and Napa Auto and they say there are no 'rear struts' in their system for Mazda 5's, that I'll have to go to the dealer. PLEASE HELP!!!

Someone recently posted that Koni and two other brands were the only non-OEM available. Look through this forum for the thread.

 

[Premacy5]

Anybody try Volvo V50 Bilstein? Koni is nice but they fade and need to be rebuild from time to time.
http://www.ipdusa.com/Volvo-V50/Suspension-&-Steering/Shocks-&-Struts-Bilstein/p-124-418-763/

Here is 07 V50 rear suspension diagram with self leveling. I could not find the one without self leveling suspension.

Here is Mazda5 rear suspension diagram

 

[Wishmaster]

Check out the KYB's... great replacement shocks - http://tinyurl.com/3hqpu6f

(don't buy the supercheap OE replacements)

 

[bootman]

There is a new part number for that Bilstein.
Part Number: 24-113830
MSRP: $164.00
Old Part Number: F4-BE5-B383-H1;F4-BE5-B383-H2

Also fits the following cars:

FORD
2004 FORD FOCUS LX 2.0L L4
2004 FORD FOCUS LX 2.3L L4
2004 FORD FOCUS SE 2.0L L4
2004 FORD FOCUS SE 2.3L L4
2004 FORD FOCUS SVT 2.0L L4
2004 FORD FOCUS ZTS 2.3L L4
2004 FORD FOCUS ZTS 2.0L L4
2004 FORD FOCUS ZTW 2.3L L4
2004 FORD FOCUS ZX3 2.0L L4
2004 FORD FOCUS ZX3 2.3L L4
2004 FORD FOCUS ZX5 2.0L L4
2004 FORD FOCUS ZX5 2.3L L4
2005 FORD FOCUS ZX3 2.0L L4
2005 FORD FOCUS ZX5 2.0L L4
2005 FORD FOCUS ZXW 2.0L L4
2005 FORD FOCUS ZX4 ST 2.3L L4
2005 FORD FOCUS ZX4 2.0L L4
2006 FORD FOCUS ZX3 2.0L L4
2006 FORD FOCUS ZX4 2.0L L4
2006 FORD FOCUS ZX4 ST 2.3L L4
2006 FORD FOCUS ZX5 2.0L L4
2006 FORD FOCUS ZXW 2.0L L4
2007 FORD FOCUS S 2.0L L4
2007 FORD FOCUS SE 2.0L L4
2007 FORD FOCUS SES 2.0L L4
2007 FORD FOCUS ST 2.3L L4
2008 FORD FOCUS S 2.0L L4
2008 FORD FOCUS SE 2.0L L4
2008 FORD FOCUS SES 2.0L L4
2009 FORD FOCUS S 2.0L L4
2009 FORD FOCUS SE 2.0L L4
2009 FORD FOCUS SEL 2.0L L4
2009 FORD FOCUS SES 2.0L L4
2010 FORD FOCUS S 2.0L L4
2010 FORD FOCUS SE 2.0L L4
2010 FORD FOCUS SEL 2.0L L4
2010 FORD FOCUS SES 2.0L L4
2011 FORD FOCUS S 2.0L L4
2011 FORD FOCUS SE 2.0L L4
2011 FORD FOCUS SEL 2.0L L4
2011 FORD FOCUS SES 2.0L L4
VOLVO
2004 VOLVO S40 I 2.4L L5
2004 VOLVO S40 T5 2.5L L5
2005 VOLVO S40 T5 2.5L L5
2005 VOLVO S40 I 2.4L L5
2005 VOLVO V50 I 2.4L L5
2005 VOLVO V50 T5 2.5L L5
2006 VOLVO S40 T5 2.5L L5
2006 VOLVO S40 2.4I 2.4L L5
2006 VOLVO V50 2.4I 2.4L L5
2006 VOLVO V50 T5 2.5L L5
2007 VOLVO S40 T5 2.5L L5
2007 VOLVO S40 2.4I 2.4L L5
2007 VOLVO V50 2.4I 2.4L L5
2007 VOLVO V50 T5 2.5L L5
2008 VOLVO C30 T5 2.5L L5
2008 VOLVO S40 T5 2.5L L5
2008 VOLVO S40 2.4I 2.4L L5
2008 VOLVO V50 2.4I 2.4L L5
2008 VOLVO V50 T5 2.5L L5
2009 VOLVO C30 T5 2.5L L5
2009 VOLVO S40 T5 2.5L L5
2009 VOLVO S40 2.4I 2.4L L5
2009 VOLVO V50 2.4I 2.4L L5
2009 VOLVO V50 T5 2.5L L5
2010 VOLVO C30 T5 2.5L L5
2010 VOLVO S40 T5 R-DESIGN 2.5L L5
2010 VOLVO S40 2.4I 2.4L L5
2010 VOLVO V50 2.4I 2.4L L5
2010 VOLVO V50 T5 R-DESIGN 2.5L L5
2011 VOLVO C30 T5 2.5L L5
2011 VOLVO S40 T5 2.5L L5
2011 VOLVO S40 T5 R-DESIGN 2.5L L5
2011 VOLVO V50 T5 2.5L L5
2011 VOLVO V50 T5 R-DESIGN 2.5L L5

No mention of Mazda, but many Volvo and Focus parts do fit the Mazda 3.
Really should be looking at the heavier duty Mazdaspeed 3 shocks due to the extra weight the 5's have over the stock 3 at the rear. (~600lb extra)

 

[Silentnoise713]

There is a new part number for that Bilstein.
Part Number: 24-113830
MSRP: $164.00
Old Part Number: F4-BE5-B383-H1;F4-BE5-B383-H2
...
Also fits the following cars:No mention of Mazda, but many Volvo and Focus parts do fit the Mazda 3.
Really should be looking at the heavier duty Mazdaspeed 3 shocks due to the extra weight the 5's have over the stock 3 at the rear. (~600lb extra)

Bilstein makes shocks for the 3, 6, Miata, and RX8. If you look up V50 and MS3, they share the same part# for *some shocks (HD and Sport line) but each also had a listing for a different pair.. Not sure why it is listed this way. The V50 and M5 are similar in weight, M5 weighing ~150 more lbs. So if the shocks between the MS3 and M5 are interchangeable and shocks between the MS3 and V50 are interchangeable, does this mean V50 shocks work on a M5 (A=B, B=C, does A=C?)? I highly advocae Bilsteins as well but the front pair seem really expensive.

MS3
http://cart.bilsteinus.com/search/mmid=1442059/drivetype=FWD
V50
http://cart.bilsteinus.com/search/mmid=1441389/drivetype=AWD

 

[Silentnoise713]

Complied this from Bilstein's website...
See anything strange?? (squinty)

In theory all of these parts should be interchangable, but they are not listed...

 

[bootman]

They should be similar in price to the Koni sports online.
The Mazdaspeed3 parts fit the 5. In the Koni world, the sports have the same part numbers for the MS3 and the M5.
The parts have to be the same for a direct fit regardless of manufacturer, so with that logic the MS3 parts should be the ones to use for the M5.

 

[DKaz]

So fronts are interchangeable, rears are not. Makes sense.

 

[njaremka]

mazda5 struts and shocks are 100% swapable with the mazda3 and mazdaspeed3. part numbers can be different if the valveing is different. the mountable parts can be 100% the same, but if the damper is valved different it will carry a different part number.

speed3 struts are more firm compared to the mazda5 struts.

 

[Premacy5]

My car seems to have bad shock since it was new. I could always feel the car wiggle a lot at highway speed. I need to make some time get it check at the dealer. Once the warranty expired I might take the plunge to get Bilstein for this car.

 

[DKaz]

The KYBs sure are budget friendly though...

 

[Bluesideup]

I looked into the V50 Bilsteins but didn't get all the way to actually compare them side by side. I am now thinking about the Koni FSDs although I have really liked Bilsteins on my other vehicles.

The KYBs are attractive from a price point but I had them on another car and they rode very stiff, not highly damped like Bilsteins but just stiff. It's a characteristic of a twin tube shock design.

 

[njaremka]

i'm waiting for ours to go out again, and they will be getting replaced with koni's. we've had both rear dampers replaced twice already, and the car doesnt even have 50,000 miles on it yet.

 

[DiscoStew]

To the OP: Are you still under 36k miles? The dealer replaced my blown shock under warranty. Still the crappy OEM, but free.