Racing Beat Paint Code?

[Heathen23]

Does anyone know the paint code that matches red Racing Beat anti-sway bars? Any insight would be greatly appreciated!

 

[ForceFed]

I'm sure that on that item there is not an exact paint code like on a car but i could be wrong assuming this.Here it Racing Beats phone number so you can contact them directly and ask them
(714)779-8677

 

[Heathen23]

Thanks Force,

I was hoping to knock out this project this weekend and I'm sure RB isn't open over a holiday weekend. I will probably just have a body shop match the paint and go from there. Thanks!

Anybody use paint to match RB paint? What brand, and more specifically what color or color number?

Thanks to all those that can help!

 

[unwound]

try some plasti-cote red brake caliper paint. the part number is CP-251 and color is bright red. you can get it at most auto parts stores. i painted my calipers with a few coats and it looks almost , and i stress almost, exact. this was just an eyeball of the color on my rear caliper beside the red of the sway bar after degreasing it to be perfectly clean. it's about 4 bucks and if you don't like it you can always use it on the calipers. hope this helps and good luck.

 

[Heathen23]

try some plasti-cote red brake caliper paint. the part number is CP-251 and color is bright red. you can get it at most auto parts stores. i painted my calipers with a few coats and it looks almost , and i stress almost, exact. this was just an eyeball of the color on my rear caliper beside the red of the sway bar after degreasing it to be perfectly clean. it's about 4 bucks and if you don't like it you can always use it on the calipers. hope this helps and good luck.

That is actually what I intend to do. I was hoping to match the racing beat sway bars, calipers, and front strut bar. Thanks for the input I will be sure to check that out. Thanks unwound

 

[BlackMSP]

pics pls

 

[Heathen23]

I will get pics up. I'm undergoing a few projects and may wait until all are complete. If that is the case it may be a few weeks but pics will be in line at that time for sure


Thanks for all the help unwound!!!

 

[unwound]

sorry, no digi cam so i got no pics...will be rectified on june 19. heathen, when you do the calipers, us a sponge brush and also get a testors model paint brush (wal-mart) for those "hard to cover areas of the caliper". took me about three hours to do all four with a 3 ton floor jack and stands...i took my time... do at least three coats for a super bright red.