Problem-Turn Signal and Power Door Locks

[Mazda6_07]

Well,very new to the site,I was trying the search function for my problem but had no luck.My 07 Mazda 6,while my wife was on her way home,phoned me and said that the turn signals and power door locks stopped working.I checked the fuses under the hood and neither one of them were blown.There was no specfic relay labelled for either the flasher or door locks,so I'm kinda at a standstill,hopefully someone here can help me with this problem.In the meantime I'll do some more searching.

Thanks

 

[nolongerinu]

Both circuits going out at the same time is interesting. There should be a relay for the signals under the hood. I dont believe there is any relays in the driver kick. The door locks on the other hand I havnt looked for the relay. The door locks are triggered by one wire that uses resistance for lock and unlock. This is actually controlled by the Door lock module. The module is found high in the passanger kick. To be on the safe side I would check every fuse in the driver kick and under the hood.

Like I said, it's odd for both circuits to go out unless your door lock module (also known as the BCM) has gone bad or it's fuse has popped.

If you have checked every single fuse in the car and still no results I would suggest taking it to as dealer to have a diag done. There may be a probably with the DLM.

Good luck.