Post Pictures of Your CX-5 Mods, Upgrades and Accessories!

[David Paul]

Got mine off of ebay using "Best Offer" for $280. Excellent quality and very fast shipping.

https://www.ebay.com/itm/Aluminum-S...954465?hash=item239ca59c21:g:hroAAOSwKNhasLeX

 

[jeffrow925]

How far do those nerf bars hang past the doors? Interested in then to help prevent door dings.

 

[Batt3k]

Wrapped the piano black pieces in the car. Still have a few more to do, but happy to not have to worry about the pieces getting scratched and showing everything. And need an interior detail after looking at the pics.

Kwalko,
How did you remove window switch panel? did you get a whole door panel off ? Thank you

 

[David Paul]

How far do those nerf bars hang past the doors? Interested in then to help prevent door dings.

Unfortunately, not enough for any added peace of mind regarding door dings. I estimate only about an inch from the widest part of the body sheet metal.

Where the side steps or running boards help is when a door is opened. It then exposes a large area for extra footing when either entering or egressing the vehicle.

 

[MasonOTA]

Added some DRL to the lower bumper. They also have the sequential turn signals. Love em! My baby boy Mazda looks so sexy! Now I have to do it again with my sisters red 17 CX5!

 

[MasonOTA]

Oh and some welcome lights!

 

[felixd]

Just want to put it here .

 

[MasonOTA]

Posted this yesterday, but it seemed to disappear. Just installed DRL in the lower fog area, and some welcome lights. The turn signals are sequential. Its a nice feature.

 

[sm1ke]

The sequential turn signal/DRL strips look nice. Any video of them in operation? Link to the product?

 

[kwalko]

Kwalko,
How did you remove window switch panel? did you get a whole door panel off ? Thank you

Yes, took the door panel off. It's the only way to get to the switch panel. The door panel was simple to take off, there are 2 screws and the rest are clips, and unhook the power cable for the switches. The switch panel took a bit to remove since I was trying to be careful and didn't know exactly how it came off. Once I figured it out, it was pretty easy.

 

[kz31KF]

Posted this yesterday, but it seemed to disappear. Just installed DRL in the lower fog area, and some welcome lights. The turn signals are sequential. Its a nice feature.

Been contemplating getting this for a while now. All I've seen were the other types and I like the 2 strips better. They look great! Did you have to remove the bumper to install the DRLs?

 

[PatrickGSR94]

I*m in the UK and got the rubber seal strips from Amazon - this one looks identical
https://www.amazon.com (commissions earned)

Best bang for buck is a tough one - in terms of money and time/effort, the rubber door seals were effective in cutting down on wind noise, and making the doors feel and sound more premium.

I*ve cut down road noise a lot with a combination of soundproofing materials on the floor and doors, but this was fairly expansive and very labor-intensive.
I*ve also soundproofed the wings/fenders (underneath the liners) but this didn*t make a huge difference.

Next up is some anti-vibration material on the roof but I*m not looking forward to dropping the headliner...

Hey I like that additional rubber door seal idea RichardCX5, how much did you end up using? Do you think 2 of those kits you linked, ~33 feet (10m) would be enough? For the doors I'm assuming you only did the part below the bottom edge of the windows, correct?

 

[RichardCX5]

Hey I like that additional rubber door seal idea RichardCX5, how much did you end up using? Do you think 2 of those kits you linked, ~33 feet (10m) would be enough? For the doors I'm assuming you only did the part below the bottom edge of the windows, correct?

I forget exactly but I think two kits did all four doors on the bottom and rear edges, the front of the hood/bonnet and three sides of the trunk/boot lid.
On the door rear edges I did all the way from the top of the door to the bottom.
A little tip, where where a hole on the bottom of the door/trunk lid, make sure you cut a slot in the rubber to allow water to drain away! Also make sure you clean the area really well before applying the rubber strip, preferably using alcohol of some sort to make sure theres no grease left.

 

[PatrickGSR94]

Will do sir, thanks for the tips!

 

[dc16]

Wrapped the piano black pieces in the car. Still have a few more to do, but happy to not have to worry about the pieces getting scratched and showing everything. And need an interior detail after looking at the pics.

Wow. Where did you get the wrap? Or did you make it yourself?
Great job!

 

[mox44ah]

Just installed DRL in the lower fog area, and some welcome lights. The turn signals are sequential. It*s a nice feature.

Where did you get the sequential lights? I've been looking but couldn't find any that were specifically designed for the CX5. I only came across some universal strips.

 

[mox44ah]

Holiday season flavor. And no, I don't drive with them on.

 

[Corbin628]

Today I installed some glossy A, B, and C pillar plastic. Cost about $13 bucks from China. Think it adds a nice touch. I believe this is standard on the GT and above but I have a touring. What do you guys think?

 

[paris1]

A Pillar? I think you mean B and C. A is where the RV mirror is.

 

[Sig cx-5]

I like it!