Post Pics of your Mazda2 / Demio

What offset are those? Looks great! I wonder if 25 offset 15x8" would fit well with CorkSport springs/dampers. The J-speed 15x8" would be great I think

s***.. I can't remember if it was 20, or 25. I don't think it would look bad. I don't THINK you'll need to roll your fenders.. If you stick with stock tire sizing (don't have to get the same stock tires, just the same size of tire), it should look pretty decent.

This is how my 2 is sitting right now. I should have some better pictures soon, along with a build thread. Shout out to Font for all the great prices on my ksports and the enkei's!

******* dope dude.. I like it.
 
IMAG0323-1.jpg

This is how my 2 is sitting right now. I should have some better pictures soon, along with a build thread. Shout out to Font for all the great prices on my ksports and the enkei's!

Aw yeah! Looking tight. Thanks for coming to me for your aftermarket needs man! Glad you're happy with everything. :)
 
No worries my dude.. What's the setup so far on the Ksports? (Like how did you get to the height you're at.. best way I can describe it).
 
No worries my dude.. What's the setup so far on the Ksports? (Like how did you get to the height you're at.. best way I can describe it).

I went the same route you did in the rear by taking out the perches for the springs. Then set the shocks as low as I could. In the front I got about an inch and a half of thread below the collar (if that makes sense haha). My subframe hates speed bumps though :(
 
I went the same route you did in the rear by taking out the perches for the springs. Then set the shocks as low as I could. In the front I got about an inch and a half of thread below the collar (if that makes sense haha). My subframe hates speed bumps though :(

Nice.. that's the only way to get decently low in the rear with the KSports (stock). Now, do you mean below the bracket that bolts to the knuckle?? Trust me dude, so does mine.. but I love, and live for the scrape haha :P. We're lucky since our subframe is lower than our oil pan, unlike other cars usually are.
 
Nice.. that's the only way to get decently low in the rear with the KSports (stock). Now, do you mean below the bracket that bolts to the knuckle?? Trust me dude, so does mine.. but I love, and live for the scrape haha :P. We're lucky since our subframe is lower than our oil pan, unlike other cars usually are.

haha I think were talking about the same thing. A pictures worth a thousand words in this instance. And it would be pretty sweet to throw some sparks on the freeway!
 
Haha seriously :P. Have you bottomed out yet with your car while driving? As soon as it warms up for real, and I get my new springs, still gonna go lower.. Throwing sparks everywherree ahah
 
F*CKIN LOVING the look. Nice, real nice. I like the blacked-out trim rings on your fogs. Did you pull off the whole assembly?

IMAG0323-1.jpg

This is how my 2 is sitting right now. I should have some better pictures soon, along with a build thread. Shout out to Font for all the great prices on my ksports and the enkei's!
 
I pulled the entire plastic part off to paint the fog light rings. I did that so the painted ring and the plastic would be the same color. There are just a few clips which hold it on. Takes about 10 seconds to get it off.
 
Haha seriously :P. Have you bottomed out yet with your car while driving? As soon as it warms up for real, and I get my new springs, still gonna go lower.. Throwing sparks everywherree ahah

haha not yet but I'm sure its coming! The stock tires and wheels gave me just enough clearance to avoid it, but soon sparks should be flying. Can't wait to see your car EVEN lower man!
 
F*CKIN LOVING the look. Nice, real nice. I like the blacked-out trim rings on your fogs. Did you pull off the whole assembly?

Thanks! I appreciate it. Yeah I went the same woute as zps2004. I just plasti diped them while I had the front bumper off to replace my fogs with HID's. To be honest it wasn't that much work, few clips and a couple screws.
 
Thanks for the info - where about are the clips - did you pull really hard from two sides, or start from one corner? My assumption was that the larger black plastic shape was screwed on...
I pulled the entire plastic part off to paint the fog light rings. I did that so the painted ring and the plastic would be the same color. There are just a few clips which hold it on. Takes about 10 seconds to get it off.
 
From what I remember there was one snap on the lower inside corner of the black plastic. Once I got that free from behind the bumper, I just pulled around the edges and the rest of them popped out no problem. The silver ring snaps into the black plastic from there, but as I said I just painted them together. There are no screws holding it in. Also none of the snaps broke on me so it went back in no problem.
 
Thanks!!!
From what I remember there was one snap on the lower inside corner of the black plastic. Once I got that free from behind the bumper, I just pulled around the edges and the rest of them popped out no problem. The silver ring snaps into the black plastic from there, but as I said I just painted them together. There are no screws holding it in. Also none of the snaps broke on me so it went back in no problem.
 
Mazda2

Somethings funny with my uploading so i linked and attached it in case it doesnt show up for you.

photostream
 

Attachments

  • IMG_20130331_124224.webp
    IMG_20130331_124224.webp
    595.3 KB · Views: 372
Damn! Every time I see your car I get jealous as hell. Should have bought green. Should have gold wheels like that. Nice stance too!

Somethings funny with my uploading so i linked and attached it in case it doesnt show up for you.

photostream
 
Back