PAC SWI-JACK Installation Help

[DaViper]

Has anyone installed a SWI-JACK steering wheel control adapter on an 09 GT model (aka bose)? According to the install instructions and this thread:
http://www.mazdas247.com/forum/showthread.php?t=123695330&highlight=swi-jack
The white wire goes to Pin #9 and Pin #10 is supposed to be grounded. My Pins #9 and #10 are the remote turn on lead and power antenna wire according to the wiring harness (which on the aftermarket harness is blue and blue/white)....should I be tapping into different wires on the bose system? I get the module to power on correctly (probably because In know I have the red and black wires hooked up correctly), but I can't program it since I don't think it's hooked up alright.

Any ideas?

 

[DaViper]

In case anyone is interested, I solved the problem. I had been using Pins 9 and 10 on the aftermarket harness, rather than the stock harness's.

The white wire on the SWI-JACK goes to pin #9 on the stock harness (which I believe was brown/white on my 09 bose harness), and Pin #10 (which I believe was white/black or white/silver on my 09 bose harness) needs to be grounded.