NGK Spark Plugs for Nitrous

[LinuxRacr]

Everyone,

For those of you who are considering going the N20 route, I have just ordered my 2 steps colder NGK plugs from Monarch Products. Monarch definitely will have these plugs in stock when you call. I looked everywhere for them, but are hard to obtain because they are really new. Monarch's contact info:
1-888-800-9629
909-672-8501

Part Numbers (There are 2 for the same plug)
NGK1283
BKR7E-11

I paid about $23 for 8 plugs with shipping/Hanling. I hopes this helps.

-Patrick

 

[LinuxRacr]

All,

I just got off of the phone with Tech support at NGK Spark Plugs, and the recommended gap for our plugs when running nitrous is .040 in. The standard gapping is .044 in. He recommended a gap closure of about .004 in for every 50 hp added. With an ingnition system this changes though. So if any of you guys think of running a better ignition, the gapping of your spark plugs supposedly MUST change.

[ 01-21-2002: Message edited by: Linuxninja ]

 

[LinuxRacr]

Well guys,

I installed my NGK Spark Plugs yesterday with the gapping stated above. It felt like I lost some power, so this morning I gapped them to about .035 in. (As suggested by Jayrcr). That seemed to make a difference! I've yet to see what will happen with Nitrous!

 

[jayrcr]

im really stoked about your kit .Im glade you remembered the caping i told you about.that way the NOS doesnt blow the spark out. Oh ya im doing import installs again at a place close to houston called GEN X.

 

[jayrcr]

im really stoked about your kit .Im glade you remembered the caping i told you about.that way the NOS doesnt blow the spark out. Oh ya im doing import installs again at a place close to houston called GEN X.

 

[LinuxRacr]

Jayrcr,

Are you using NGK Plugs?

 

[jayrcr]

yes i am using NGK in my mp3 and trans am.

 

[LinuxRacr]