Need Help

[2000mazdaproteg]

I have been having problems with my 2000 1.6 liter mazda protege and have discovered that the plug to one of my ignition coils was broken. All I need is the plug with a few inches of cable correctly attached to it and I'll be set to jet. I have found that it is nearly impossible to find a replacement for this online, or at my local scrap yards. Does anyone know a place i can get this, or know which other types of cars run on the same engine?

Thank you for reading and any help you can offer

 

[concept]

Have you tried the dealership? Also, Allied
http://www.alliedelec.com/connectors/electrical-connectors/

and digikey
http://www.digikey.com/

have lots of connectors take a picture of the bad one and email it to them to see what they come up with.

 

[AzteCypher]

I would check any older mazda or possibly even ford with a 1.6L or 1.5L. Maybe something between 98 & 2001. Contact Speedracr79 here on the forum. I know he's got about 2 spare 1.6L engines but I don't know if he's got those connectors. Drop him a line and see what he says.

 

[2000mazdaproteg]

Thanks for the help guys, I'm still looking but at least I know where to start now