My Ebay DP

[mazdaru]

an awesome quality catless dp...I LOVE nonename brand products that are cheap and good quality

installed

vids. quality isnt the best. ineed to update the radio on my phone again b/s the mic sounds like s***

the drive bys could have been better. my friend kept letting off as he passed the camera so blame the fail on him haha. will get better clips.

YouTube - Mazdaspeed 3 Catless DownPipe 1 Resonator Delete 1
YouTube - Mazdaspeed 3 Catless DownPipe 1 Resonator Delete 2
YouTube - Mazdaspeed 3 Catless DownPipe 1 Resonator Delete 3
YouTube - Mazdaspeed 3 Catless DownPipe 1 Resonator Delete 4

 

[SallySpeed3]

wow, looks good, with the money you save I would put in a High flow cat but thats just me

 

[mazdaru]

i may. going to get a CBE, first. looking at a custom CBE with dual tip(not dual or quad exhaust but dual tip like the racing beat muffler,) used CS with an extra high flow resonator welded in since they are loud or the CNT exhaust for 330.

if the exhaust is still too loud, then ill get a cat welded into the dp

 

[gudzspeed3]

do u notice any power differences or any differences in the way it feels when driving it?

 

[mazdaru]

hell yeah, the car pulls HARD. throttle response is more crisp. the turbo wants to spool and keep spooling. eventhough the throttle plate this still closing after 5500rpm, the power gain above 5500 is very noticeable. not to mention, how much better the exhaust sounds. i cant believe i waited this long to go dp but im glad i did b/c 170 shipped for a high quality FULL DP is nothing but WIN.

i recommend these Ebay dps to everyone. the quality is top notch...hell, just look at the pics

 

[Saskatchewan17]

Wow... quality looks awesome. How was the install? And what happened to the hangars? Just decided not to use them, or they didn't fit, or what?
Let us know how it holds up. Now you've got me tempted to replace my tp/hacked up stock cbe to a cheap TBE.

 

[mazdaru]

the front and rear of the car needs to be off the ground to install these full dps. you have to face the bellmouth down when inserting the dp in then twist it up to the left as you move up the exhaust canal over the subframe. being that i couldnt get my car high enough off the ground, the hangars would get caught on the heat shield. something you wont have to worry about if you have access to a lift or the car is high enough off the ground(ramps in front and stands in back.) therefore i had to cut the hangars then it with went in with ease. i honestly dont see the dp having any issues, if so, at the price-ill deal with it and take it to the shop around the corner so they can fix it. but i dont see anything happening. its a stout piece. im going to leave the hangers off b.c id imagine they would just cause more drone.

the tweet sound is coming from the mic, not the exhaust. Ebay DP+stock CBE with 1 resonator delete. ill get soe better vids, tomorrow
http://www.youtube.com/watch?v=nqEtvC4WZGc

ill def give an update in a couple months.

in the meantime...im going to contact CNT tomorrow to see if they can weld their STI dual tip onto their MS3 CBE(the left tip to be exact, so it follows the curvature of the diffuser)...hopefully they can and ill be ordering that next.

 

[mazdaru]

engine bay put back together

 

[jay32m]

Very nice! Any CEL?

 

[mazdaru]

no CEL or smoke. the car pulls so hard. especially beyond 5500.

 

[goob_os101]

how long did it take to install?

 

[mazdaru]

about 8 hrs b/c i had a major issue with getting my midpipe off of my dp. so much that i just had to go to sleep and clear my head. but before i got to the midpipe issues. we had all of the shields, chassis braces and nuts of the turbo in less than a hour. then got stuck on the midpipe for like 3hrs. went to bed then in the morning, i was able to get the midpipe out after about a hour. then we had to make a run to the store for ramps. next,the hangars became a problem since i chouldnt get they car off the ground high enough so we made a run to the shop and had them cut the hangars off. after that, it was smooth sailing.

so it would have taken about 2.5 hrs if none of those issues took place

 

[mrdouble99]

Can you send me the EBAY link of that DP plz

 

[mazdaru]

.

 

[araw at bituin]

nice!! subbing for vids

 

[mrdouble99]

Do you know the kind of stainless steel they use and the gauge ?

 

[mazdaru]

304 ss

 

[uthemang31]

hell yeah, the car pulls HARD. throttle response is more crisp. the turbo wants to spool and keep spooling. eventhough the throttle plate this still closing after 5500rpm, the power gain above 5500 is very noticeable. not to mention, how much better the exhaust sounds. i cant believe i waited this long to go dp but im glad i did b/c 170 shipped for a high quality FULL DP is nothing but WIN.

i recommend these Ebay dps to everyone. the quality is top notch...hell, just look at the pics

I have been thinking about picking-up one of this DP for my speed. Please post-up a review of the pipe after 1000 miles, to predict any issues.

 

[daonly1around]

i'd like to see how this holds up after some miles

 

[mazdaru]

will do in a couple months