My Dyno Pics / Vids

[Maxx Mazda]

That's awesome! I envy you so much and not to mention how anxious I am to see the results at 18+psi. Beautiful build, beautiful car...congrats!

Thank you very much!

Have you had your car on the dyno yet? It would be interesting to see what kind of numbers you put down.

 

[Jaysanooch]

Ya last year after my trip to Speedcircuit. I made 196/189 at 9.5-10psi. That's with AFR's at around high 10's and low 11's with 13 degree's of timing pulled from 5k rpm to redline.

We retuned last february 07 and installed the j&s safeguard wich allowed us to advance timing about 2 degree on the top end and leaned things out abit more...and the car feels alot stronger, power stays all the way to redline now.

I didn't dyno it since but I know it's little over 200whp...Dana could of given more power but I plan to keep the stock block as long as I can or until I build the bottom end.

 

[Rogue]

were you making your runs in 3rd gear?

 

[Jaysanooch]

No...4th gear why?

 

[Rogue]

were you making your runs in 3rd gear?

sorry. i was asking Maxx. On his dyno runs it said he was doing 90mph

 

[Jaysanooch]

sorry. i was asking Maxx. On his dyno runs it said he was doing 90mph

oups!

 

[Rogue]

my dyno results were way lower than I expected at 7psi with the mods I have. I guess it's the MSP ECU

 

[Maxx Mazda]

Ya I used 3rd. Built tranny though, my ratios are different.

 

[Rogue]

is your 3rd gear closer to 1:1 than your 4th?

 

[blkspdfreak]

congrats, request for some vids soon???(bowdown)

 

[azian6er]

GT2871R is next. That's PLENTY big...

pffhhhssss.. gt3071 ftw, or if you are feeling frisky ... gt35r

 

[igdrasil]

Yeah the gt35r is a quick booster, its very very quick, specially on this 2.0L engine. Sometimes people think its a small turbo when you hear it spoolup...vid in that video - check 4th gear you will hear it surges (sorry for the bad music editing, i did not make that video..actually, I hate it)..

 

[Maxx Mazda]

congrats, request for some vids soon???(bowdown)

Vids are in the first post man.

 

[Maxx Mazda]

pffhhhssss.. gt3071 ftw, or if you are feeling frisky ... gt35r

Found one on ATP's site for like $1300...

 

[FunkyBuddha]

that's awesome man! nice numbers!! let's go hunting! and a proper photoshoot!

 

[Dpwhitehead1]

awesome dude. glad to see these numbers. i'd like to compare to my t3t4 @ the same psi levels and see what i get. woot. DANA!!!!!!!!!!!!!!!!!!

 

[Kooldino]

The T3 you're running is FAR from teeney. It's not like you're running a KKK turbo, or even a stock MSP turbo.

Nice numbers. That engine looks dope.

 

[Kooldino]

GT2871R is next. That's PLENTY big...

Lemme know when you want the one I have here sitting on the shelf.

You'll lose some low end, but if you're looking for 18+psi, it will git er done.

 

[Dpwhitehead1]

i'm excited to see my numbers too dana..DYNO, me you, 5psi, 10 psi....set the dual stage boost controller.woot.

 

[Maxx Mazda]

The T3 you're running is FAR from teeney. It's not like you're running a KKK turbo, or even a stock MSP turbo.

Nice numbers. That engine looks dope.

Ya man, thanks again for the rock solid build. Had no problem wringing it up to almost 7500 RPM too! A true testament to your skills.

I will take that turbo off ya eventually, but more than likely over the winter. I'm really curious to see what my T3 will do around 18psi. Next week we find out!