MP3 Aftermarket Guide--UPDATED 03-14-03

NC_MP3 · Aug 9, 2002

MP3 Aftermarket Guide

This is an aftermarket guide I have put together. It is now in html format. Simply click on the appropriate category and you will be taken to it.

Please post additions, corrections, or suggestions here: <A HREF=http://www.mazdamp3.com/vbb225/showthread.php?s=&threadid=6415 TARGET=NEW>AFTERMARKET GUIDE ADDITIONS</A> 
 
<A NAME=#0>MAZDA MP3 AFTERMARKET GUIDE</A> 
 
<A HREF=#00>ENGINE</A> 
<A HREF=#01>INTAKES</A> 
<A HREF=#02>EXHAUST</A> 
<A HREF=#03>FORCED INDUCTION</A> 
<A HREF=#04>COOLING</A> 
<A HREF=#05>DRIVETRAIN</A> 
<A HREF=#06>SUSPENSION</A> 
<A HREF=#07>BRAKES</A> 
<A HREF=#08>EXTERIOR</A> 
<A HREF=#09>INTERIOR</A> 
<A HREF=#10>FUEL SYSTEM</A> 
 
 
<A NAME=#00>ENGINE</A> 
<A HREF=#001>JDM ENGINES</A> 
<A HREF=#002>BOTTOM END</A> 
<A HREF=#003>VALVE TRAIN</A> 
<A HREF=#004>OTHER</A> 
 
<A NAME=#001>JDM ENGINES</A> 
FS-ZE Engine 
This is the engine that comes in the Japanese Sport 20. It is rated at 170 HP and bolts right in to the MP3. Engines are from wrecked Japanese cars with low miles. Comes with fuel injectors, intake, and exhaust manifold. ECU is not included but can be purchased. 
Price: $1,950.00 
<A HREF=HTTP://WWW.CORKSPORT.COM TARGET=NEW>CORKSPORT</A> 
 
<A HREF=#00>BACK TO ENGINE</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#002>BOTTOM END</A> 
Thomas Knight Stroker Kit 
2150cc stroker kit that features forged rods and pistons. Includes crank, rods, bearings, pistons, rings and pins. 
Price: $1,995.00 
<A HREF=http://www.knightturbos.com TARGET=NEW>KNIGHT TURBO</A> 
 
Mazdaspeed High Compression Pistons 
These are 10.7:1 pistons for the 2.0. HP gain is unknown. 
Price: $42.00 for each piston 
<A HREF=http://www.mazdamotorsports.com TARGET=NEW>MAZDAMOTORSPORTS</A> 
 
Tripoint Engineering Aluminum Flywheel 
Aluminum Flywheel for the 2.0. Weighs approx. 7.42 lbs. Stock flywheel weighs about 18.5 lbs. 
Price: $389.00 
<A HREF=http://www.tripointengineering.com TARGET=NEW>TRIPOINT</A> 
 
Indigo Flywheel 
Aluminum Flywheel for the 2.0. Weight is unknown. 
Price: $439.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SRMOTORSPORTS</A> 
 
Mazdamotorsports 15lb Flywheel 
This flywheel is lightened 3 lbs from stock. 
Price: $138.65 
<A HREF=http://www.mazdamotorsports.com TARGET=NEW>MAZDAMOTORSPORTS</A> 
 
Fidanza Billet Flywheel 
This is a flywheel for the 2.0L engine. It weighs in at only 9 lbs. 
Price: $260 
<A HREF=http://www.rr-racing.com TARGET=NEW>RR RACING</A> 
 
<A HREF=#00>BACK TO ENGINE</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#003>VALVE TRAIN</A> 
Mazdaspeed Exhaust Camshaft 
This is a more aggressive exhaust cam for the 2.0 L FS engine. It has not been tested, but this cam w/ the intake cam only added about 5 WHP. 
Price: $142.00 
<A HREF=http://www.corksport.com TARGET=NEW>CORKSPORT</A> 
 
FS-ZE Intake Camshaft 
This is an intake cam from the Japanese FS-ZE engine. This will fit right in the MP3. This and the Mazdaspeed exhaust cam added about 5 WHP. 
Price: $168.00 
<A HREF=http://www.corksport.com TARGET=NEW>CORKSPORT</A> 
 
Billet Exhaust Cam 
This is a blank cam. Journels are ground but lobes are not, meaning you can have it ground to any spec you want. 
Price: $71.55 
<A HREF=http://www.mazdamotorsports.com TARGET=NEW>MAZDAMOTORSPORTS</A> 
 
Billet Intake Cam 
This is a blank cam. Journels are ground but lobes are not, meaning you can have it ground to any spec you want. 
Price: $73.05 
<A HREF=http://www.mazdamotorsports.com TARGET=NEW>MAZDAMOTORSPORTS</A> 
 
Tripoint Engineering Adjustable Cam Gears 
Adjustable Cam Gears for the 2.0. Black gear w/ blue anodized center. Timing marks on the gear. Bolts right on. 
Price: $299.00 
<A HREF=http://www.tripointengineering.com TARGET=NEW>TRIPOINT</A> 
 
FS-ZE Valve Springs 
These are valve springs from the Japanese FS-ZE. It is unknown if they are stiffer than stock MP3 or not. 
Price: $48.30 each 
<A HREF=http://www.mazdamotorsports.com TARGET=NEW>MAZDAMOTORSPORTS</A> 
 
<A HREF=#00>BACK TO ENGINE</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#004>OTHER</A> 
Indigo Underdrive Main Pulley 
This pulley is 15% smaller in diameter than stock. It replaces the crank pulley and includes new belts. HP gains are unknown. 
Price: $249.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
Indigo Alternator/Water Pump Pulley Set 
Made of aluminum and with a 15% reduced diameter these pulleys will reduce the amount of HP needed to turn the alternator and water pump. Fits the 2.0L engine. 
Price: $199.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
AWR Engine Mounts 
These are urethane engine mounts for the 2.0. These should reduce wheel hop. 
Price: $145.00 
<A HREF=http://www.awrracing.com TARGET=NEW>AWR RACING</A> 
 
<A HREF=#00>BACK TO ENGINE</A> 
<A HREF=#0>BACK TO TOP</A> 
 
 
<A NAME=#01>INTAKES</A> 
 
AEM Short Ram Intake 
Short Ram intake system for the 2.0L engine. Comes in blue, red, and silver. Price: $203.13 
<A HREF=http://www.nopionline.com TARGET=NEW>NOPI</A> 
 
Injen Intake System 
Cold Air Intake for the 2.0. Polished aluminum. 
Price: $258.00 
<A HREF=http://www.mazdaformance.com TARGET=NEW>MAZDAFORMANCE</A> 
 
Indigo Intake System 
This intake is made of polished aluminum and comes with all hardware and hoses. Filter is included. 
Price: $249.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#01>BACK TO INTAKES</A> 
<A HREF=#0>BACK TO TOP</A> 
 
 
<A NAME=#02>EXHAUST</A> 
<A HREF=#021>CAT BACK</A> 
<A HREF=#022>FULL EXHAUST</A> 
<A HREF=#023>HEADERS</A> 
<A HREF=#024>MUFFLERS</A> 
 
<A NAME=#021>CAT BACK</A> 
Borla Cat Back 
Stainless Steel cat back exhaust for the Protg, should work fine with the MP3. 
Price: $478.80 
<A HREF=http://www.mazdamotorsports.com TARGET=NEW>MAZDAMOTORSPORTS</A> 
 
SRMotorsports Cat Back Exhaust 
Made of 2.25 inch mandrel bent pipe this cat back system has a claimed HP increase of 9 HP. It has a 3 inch stainless steel tip. It comes with a gasket and all hardware needed. 
Price: $449.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#02>BACK TO EXHAUST</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#022>FULL EXHAUST</A> 
 
<A HREF=#02>BACK TO EXHAUST</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#023>HEADERS</A> 
HP Racing Exhaust Header 
Two piece 4-2-1 header for the 01+ Protg/MP3. Comes in ceramic or chrome finish. 
Price: $206.91, $173.79 respectively. 
<A HREF=http://www.nopionline.com TARGET=NEW>NOPI</A> 
 
<A HREF=#02>BACK TO EXHAUST</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#024>MUFFLERS</A> 
 
<A HREF=#02>BACK TO EXHAUST</A> 
<A HREF=#0>BACK TO TOP</A>

NC_MP3 · Aug 9, 2002

<A NAME=#03>FORCED INDUCTION</A> 
<A HREF=#031>TURBO KITS</A> 
<A HREF=#032>TURBO MANIFOLDS</A> 
<A HREF=#033>OTHER</A> 
 
<A NAME=#031>TURBO KITS</A> 
Tripoint Engineering Turbo Kit 
This kit consist of an Aerodyne Turbo Charger, Tri-Point Engineering Front Mount Intercooler, Tri-Point Engineering AIC (additional Injector controller), 2 additional injectors, Intake Piping, Down Pipe, Autometer Boost gauge, Mazda Blow Off Valve, Clamps and coupling hoses. This kit provided a gain of 67 HP. 
Price: $3,800.00 
<A HREF=http://www.tripointengineering.com TARGET=NEW>TRIPOINT</A> 
 
SPOOL Starter Kit 
This kit includes the SPOOL manifold along with a Ballistic Garrette turbo and steel braided oil lines. 
Price: $1,600.00 
<A HREF=http://www.spool-turbo.com TARGET=NEW>SPOOL ITS</A> 
 
SPOOL Stage 1 Turbo Kit 
This kit uses the SPOOL shorty style manifold with a Garrett T3 turbo. Kit includes everything you need to run 4-5 psi. This is a non intercooled setup. Can be upgraded to Stage 2-4. 
Price: $2,595 
<A HREF=http://www.spool-turbo.com TARGET=NEW>SPOOL ITS</A> 
 
SPOOL Stage 2 Turbo Kit 
This is the same as the stage 1 but uses a more equal length race style manifold. 
Price: $2,795 
<A HREF=http://www.spool-turbo.com TARGET=NEW>SPOOL ITS</A> 
 
SPOOL Stage 3 Intercooler Upgrade 
This is an add on intercooler for the Stage 1 and 2 kits. The intercooler is a huge front mount PWR unit. With proper tuning this kit can be run up to 8 psi. 
Price: $900 
<A HREF=http://www.spool-turbo.com TARGET=NEW>SPOOL ITS</A> 
 
SPOOL Stage 4 Upgrade 
Coming Soon. This will be a solution to the stock Mazda ECU. It will be some sort of piggy back computer to control timing and fuel, but will not be a full stand alone ECU. With proper tuning of the fuel and timing, and use of bigger injectors, the MP3 should be able to handle 10-12 psi. 
Price: TBA 
<A HREF=http://www.spool-turbo.com TARGET=NEW>SPOOL ITS</A> 
 
Flyin Protg (Flyin Miata) Turbo Kit 
This is a complete turbo kit from Flyin Protege. It features a log style, cast iron manifold, a Garrette T03 turbo, and a small front mount (sort of) intercooler. Comes complete with everything you need, boost gauge, blow off valve, everything. 
Price: $3,595 
<A HREF=http://www.flyinmiata.com/protege TARGET=NEW>FLYIN PROTEGE</A> 
 
Mazdaformance Turbo Kit 
In development. 
<A HREF=http://www.mazdaformance.com TARGET=NEW>MAZDAFORMANCE</A> 
 
<A HREF=#03>BACK TO FORCED INDUCTION</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#032>TURBO MANIFOLDS</A> 
SPOOL Cast Iron Tubular Manifold 
This is a cast iron tubular manifold made specifically for the 2.0. This manifold is made to fit a T3 turbo and utilizes an external wastegate (sold serperately). Ceramic coating is also available for an added fee. 
Price: $700.00 
<A HREF=http://www.spool-turbo.com TARGET=NEW>SPOOL ITS</A> 
 
SPOOL Shorty Style Manifold 
This is also a cast iron, tubular manifold, but uses shorter runners that are not equal length. Use an external wastegate 
Price: $550 
<A HREF=http://www.spool-turbo.com TARGET=NEW>SPOOL ITS</A> 
 
<A HREF=#03>BACK TO FORCED INDUCTION</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#033>OTHER</A> 
 
<A HREF=#03>BACK TO FORCED INDUCTION</A> 
<A HREF=#0>BACK TO TOP</A> 
 
 
<A NAME=#04>COOLING</A> 
<A HREF=#041>RADIATORS</A> 
 
<A NAME=#041>RADIATORS</A> 
SRMotorsports SC Radiator 
Made from fully TIG welded aluminum these radiators offer 40-60% more cooling. Made to be a perfect factory fit. 
Price: $529.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#04>BACK TO COOLING</A> 
<A HREF=#0>BACK TO TOP</A> 
 
 
<A NAME=#05>DRIVETRAIN</A> 
<A HREF=#051>CLUTCH</A> 
<A HREF=#052>TRANSMISSION</A> 
<A HREF=#053>SHIFTERS</A> 
 
<A NAME=#051>CLUTCH</A> 
ACT Clutch Kit 
ACT makes a clutch for the 2.0. You only have one choice for the pressure plate, which is the heavy duty pressure plate. There are 3 disks available: street, 4 puck, and 6 puck. The street disk is recommended for daily driving. The 4 and 6 puck grab harder and hold more power but are harsh. Kit includes pressure plate, disk, pilot, and throw out bearings. 
Price: $391.00 
<A HREF=http://www.tripointengineering.com TARGET=NEW>TRIPOINT</A> 
 
<A HREF=#05>BACK TO DRIVETRAIN</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#052>TRANSMISSION</A> 
Quaife LSD 
Limited Slip Differential for the 2.0. LSDs provide better traction and handling by transferring equal amounts of power to both front wheels. 
Price: $1,227.00 
<A HREF=http://www.mazdamotorsports.com TARGET=NEW>MAZDAMOTORSPORTS</A> 
 
4.833 Final Drive Gear 
Lower final drive gear should provide better acceleration. Fits all G type trannys (MP3 uses G25M-R Tranny). 
Price: $2,368.55 
<A HREF=http://www.mazdamotorsports.com TARGET=NEW>MAZDAMOTORSPORTS</A> 
 
<A HREF=#05>BACK TO DRIVETRAIN</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#053>SHIFTERS</A> 
B&M Short Shifter 
This shifter provides about 40% reduction in throw. Includes stiffer bushings as well. 
Price: $144.00 
<A HREF=http://www.mazdaformance.com TARGET=NEW>MAZDAFORMANCE</A> 
 
Kartboy Short Shifter w/ Bushings 
This is a short throw shifter for the MP3 complete with stiffer bushings. 
Price: $100.00 
<A HREF=http://kartboy.com TARGET=NEW>KARTBOY</A> 
 
SRMotorsports Short Shifter 
This is a short throw shifter for the MP3. 
Price: $179.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#05>BACK TO DRIVETRAIN</A> 
<A HREF=#0>BACK TO TOP</A> 
 
 
<A NAME=#06>SUSPENSION</A> 
<A HREF=#061>SPRINGS</A> 
<A HREF=#062>SWAY BARS</A> 
<A HREF=#063>COILOVERS</A> 
<A HREF=#064>SHOCKS</A> 
<A HREF=#065>STRUT BARS</A> 
 
<A NAME=#061>SPRINGS</A> 
Ground Control Adjustable Springs 
These springs can be adjusted so you can fine tune your ride height. Fits right on the MP3. 
Price: $375.00 
<A HREF=http://www.mazdaformance.com TARGET=NEW>MAZDAFORMANCE</A> 
 
Eibach Pro Lowering Springs 
Unknown how much of a drop these are. 
Price: $249.95 
<A HREF=http://www.mazdaformance.com TARGET=NEW>MAZDAFORMANCE</A> 
 
SRMotorsports HP Spring Kit 
Lowers the Protg 1.35 inches. Since we have Racing Beat springs it is unknown how much of a drop these will give the MP3. 
Price: $265.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#06>BACK TO SUSPENSION</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#062>SWAY BARS</A> 
SRMotorsports Rear Sway Bar Set 
This is a 19mm tubular chrome moly sway bar. This may not provide any more of a performance gain over out stock Racing Beat sway bar, but I put this one in here anyway. 
Price: $189.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#06>BACK TO SUSPENSION</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#063>COILOVERS</A> 
SR Motorsports Coilover Set 
Fully adjustable coil over kit for the MP3. 2.5 inch springs, various springs rates. 
Price: $1,499.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#06>BACK TO SUSPENSION</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#064>SHOCKS</A> 
Mazdaspeed Adjustable Shocks 
4 and 5 way adjustable. Fits MP3. 
Price: $179.00 each 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#06>BACK TO SUSPENSION</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#065>STRUT BARS</A> 
DGMotorsports Carbon Fiber Strut Bar 
Real carbon fiber strur bar for the 2.0 
Price: $295.00 
<A HREF=http://www.dgmotorsports.com TARGET=NEW>DGM</A> 
 
SRMotorsports Strut Brace 
This brace is made of aluminum and has your choice of red, blue, black, and yellow ends. 
Price: $169.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#06>BACK TO SUSPENSION</A> 
<A HREF=#0>BACK TO TOP</A>

NC_MP3 · Aug 11, 2002

<A NAME=#07>BRAKES</A> 
<A HREF=#071>BRAKE KITS</A> 
<A HREF=#072>ROTORS</A> 
<A HREF=#073>PADS</A> 
<A HREF=#074>LINES</A> 
 
<A NAME=#071>BRAKE KITS</A> 
StopTech Front Big Brake Kit 
This is a Big Brake Kit for the front only. 
The kit includes: 
- 2 Piece Floating Directional 328mm x 28mm AeroRotors, Cross-Drilled. 
- 4 Piston ST40 Calipers, Painted Red. 
- 7075 T6 Billet Aluminum Caliper Brackets. 
- 7075 T6 Billet Aluminum Hats. 
- Stainless Steel Brake Lines. 
- AXXIS Ultimate Brake Pads. 
- All Necessary Hardware. 
Price: $1,795.00 
<A HREF=http://www.mazdaformance.com TARGET=NEW>MAZDAFORMANCE</A> 
 
RR-Racing Big Brake Kit Full Race 
This is a full big brake kit for the front brakes only. This kit comes with rotors from 12.2 inch all the way up to 13 inches in diameter and are 1.25 inches thick. Also comes with 4-piston calipers, and all hardware needed for the conversion. May not work with stock sized rims. 
Price: $1100 - $1600 
<A HREF=http://www.rr-racing.com TARGET=NEW>RR RACING</A> 
 
RR-Racing Big Brake Kit 
This is a big brake kit for the front only. Converts to 2-piece 12.0" diameter, 1" thick, directional curved vane rotors w/ stock calipers. Utilizes billet aluminum rotor hat, billet caliper relocation brackets, and available cross drilled or slotted (no additional cost) rotors. Works with stock sized rims. 
Price: $580 
<A HREF=http://www.rr-racing.com TARGET=NEW>RR RACING</A> 
 
<A HREF=#07>BACK TO BRAKES</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#072>ROTORS</A> 
SRMotorsports Rotors 
These rotors come either slotted or drilled. Front and back available. 
Price: $119.00 each 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#07>BACK TO BRAKES</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#073>PADS</A> 
SRMotorsports High Performance Brake Pads 
High performance brake pads for the MP3 
Price: $89.00 /set 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#07>BACK TO BRAKES</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#074>LINES</A> 
Steel Braided Brake Line Kit 
These steel braided lines will give you a much firmer brake pedal. Comes with all needed hardware. 
Price: $129.00 
<A HREF=http://www.srmotorsports.com TARGET=NEW>SR MOTORSPORTS</A> 
 
<A HREF=#07>BACK TO BRAKES</A> 
<A HREF=#0>BACK TO TOP</A> 
 
 
<A NAME=#08>EXTERIOR</A> 
<A HREF=#081>BODY KITS</A> 
<A HREF=#082>HOODS</A> 
<A HREF=#083>TAIL LIGHTS</A> 
<A HREF=#084>OTHER</A> 
 
<A NAME=#081>BODY KITS</A> 
Wings West Body Kit 
Wings West makes a body kit for the MP3. Basic kit includes front bumper replacement, 2 side skirts, and a rear lip type spoiler. There is also an additional fender flare kit, a hood bonnet, and a rear window, umm, thing. 
Price: $660.00 for the 4 piece kit 
<A HREF=http://www.nextcollection.com TARGET=NEW>NEXT COLLECTION</A> 
 
<A HREF=#08>BACK TO EXTERIOR</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#082>HOODS</A> 
APC W Vented Carbon Fiber Hood 
This is a W vented carbon fiber hood for the MP3. 
Price: $649.00 
<A HREF=http://www.4apc.net TARGET=NEW>APC</A> 
You can order the hood from Pep Boys for $649.00 You can also get it from Autozone and Advance Auto for $699.00 
 
Tripoint Engineering Carbon Fiber Hood 
Carbon Fiber hood for the MP3. Hood is OEM meaning it is the same as stock but carbon fiber. 
Price: $475.00 
<A HREF=http://www.tripointengineering.com TARGET=NEW>TRIPOINT</A> 
 
DGMotorsports Ram Air Carbon Fiber Hood 
This is a carbon fiber hood with a functional scoop on the drivers side. 
Price: $1,195.00 
<A HREF=http://www.dgmotorsports.com TARGET=NEW>DGM</A> 
 
DGMotorsports Carbon Fiber Hood 
This is the same as above but without the ram air scoop. 
Price: $695.00 
<A HREF=http://www.dgmotorsports.com TARGET=NEW>DGM</A> 
 
<A HREF=#08>BACK TO EXTERIOR</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#083>TAIL LIGHTS</A> 
APC Euro Tail Lights 
Euro or Altezza type tail lights for the 01 + Protg/MP3. Comes in carbon look, original, and generation 2 styles. 
Price: $162.70, $142.86, $171.95 respectively. 
<A HREF=http://www.Nopionline.com TARGET=NEW>NOPI</A> 
 
<A HREF=#08>BACK TO EXTERIOR</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#084>OTHER</A> 
DGMotorsports Carbon Fiber Downforcers 
These attach to the bottom of the front bumber on the right and left corner. 
Price: $179.95 
<A HREF=http://www.dgmotorsports.com TARGET=NEW>DGM</A> 
 
DGMotorsports Carbon Fiber Side Skirts 
These are real carbon fiber side skirts. They are listed for the P5, but should work for the MP3 as well. 
Price: $395.00 
<A HREF=http://www.dgmotorsports.com TARGET=NEW>DGM</A> 
 
DGMotorsports Carbon Fiber Eyelids 
These are real carbon fiber eyelids for the MP3 headlights. 
Price: $59.95 
<A HREF=http://www.dgmotorsports.com TARGET=NEW>DGM</A> 
 
DGMotorsports Carbon Fiber Front Lip 
This is a real carbon fiber lip type spoiler for the MP3 front bumper. 
Price: $375.00 
<A HREF=http://www.dgmotorsports.com TARGET=NEW>DGM</A> 
 
DGMotorsports Carbon Fiber Rear Valance 
This is a real carbon fiber lip type valance for the MP3 rear bumper. 
Price: $199.00 
<A HREF=http://www.dgmotorsports.com TARGET=NEW>DGM</A> 
 
DGMotorsports Carbon Fiber Front End 
This is a whole front clip made from carbon fiber. It is all one piece as well. It is listed for the P5, but should work for the MP3. 
Price: $1,495.00 
<A HREF=http://www.dgmotorsports.com TARGET=NEW>DGM</A> 
 
DGMotorsports Fiberglass Front End 
Same as above but made out of fiberglass. 
Price: $895 
<A HREF=http://www.dgmotorsports.com TARGET=NEW>DGM</A> 
 
<A HREF=#08>BACK TO EXTERIOR</A> 
<A HREF=#0>BACK TO TOP</A> 
 
 
<A NAME=#09>INTERIOR</A> 
<A HREF=#091>GAUGE FACES</A> 
<A HREF=#092>ROLL CAGES</A> 
<A HREF=#093>DASH KITS</A> 
 
<A NAME=#091>GAUGE FACES</A> 
Indiglo Gauge Faces 
Includes Generation 2, 6 stage digital inverter. Blue/light blue/bluegreen/green/violet/lightgreen, pure white in the day with scratch resistant surface. 
Price: $49.00 
<A HREF=http://www.procarparts.com TARGET=NEW>PROCARPARTS</A> 
 
<A HREF=#09>BACK TO INTERIOR</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#092>ROLL CAGES</A> 
 
<A HREF=#09>BACK TO INTERIOR</A> 
<A HREF=#0>BACK TO TOP</A> 
 
<A NAME=#093>DASH KITS</A> 
 
<A HREF=#09>BACK TO INTERIOR</A> 
<A HREF=#0>BACK TO TOP</A> 
 
 
<A NAME=#10>FUEL SYSTEM</A> 
<A HREF=#101>INJECTORS</A> 
 
<A NAME=#101>INJECTORS</A> 
RR-Racing Injectors 
RR-Racing is selling modified injectors for the MP3. Injectors can be modified to up to 700cc. 
Price: $380 
<A HREF=http://www.rr-racing.com TARGET=NEW>RR RACING</A> 
END

MP3 Aftermarket Guide--UPDATED 03-14-03

NC_MP3

Member

NC_MP3

Member

NC_MP3

Member

New Posts and Comments

New Threads and Articles