Mazdaspeed pedal set

[joaco]

For those of you that want the Mazdaspeed pedals go to your local dealer and order a set using this part nunber, 0000-8R-C19. This are the ones that says Mazdaspeed and came in the 2003.5 MSP's. It retail for $60.00 and come with mounting screws.
Joaquin

 

[Togan]

oh thx for the idea!

 

[joaco]

Your welcome
Joaquin

 

[Phoenix5]

Do those require drilling or are they easy and go over the stock ones??

 

[tttP5]

let me add to this, the mazdaspeed shift knob (the one with the mazdaspeed logo) is only 55bucks too at the dealers. good deal... but won't fil unless you have a Short shifter

 

[Black Majik MSP]

$45 shipped here: http://www.msprotege.com/forum/showthread.php?t=61848

 

[joaco]

Phoenix5
The cluth and brake are replacement for the factory ones and they are slip-ons. The gas one you need to drill two small holes on the pedal. A 30 min job.

 

[Captain KRM P5]

let me add to this, the mazdaspeed shift knob (the one with the mazdaspeed logo) is only 55bucks too at the dealers. good deal... but won't fil unless you have a Short shifter

this is incorrect. the thread pitch between all protege shifters except the mp3 is the same.

 

[Phoenix5]

(pics)

 

[tttP5]

this is incorrect. the thread pitch between all protege shifters except the mp3 is the same.

r u sure? cause the guy at the dealer said specificially it would not fit my protege 5, and i'm sure some other board members said that the mazdaspeed logo shift knob wouldn;t fit unless you had a B&M short shifter or the MSP shifter

 

[Captain KRM P5]

r u sure? cause the guy at the dealer said specificially it would not fit my protege 5, and i'm sure some other board members said that the mazdaspeed logo shift knob wouldn;t fit unless you had a B&M short shifter or the MSP shifter

i am 110% sure. i've tried all of the knobs on stock and b&m levers

 

[alexlitov]

this is incorrect. the thread pitch between all protege shifters except the mp3 is the same.

MSP knob doesn't fit P5 shifter....

 

[Captain KRM P5]

MSP knob doesn't fit P5 shifter....

yes it does, i've had it on my stock shifter

 

[tttP5]

did u need to do any modifications done to your stock P5 shifter?

 

[joaco]

Well guys, the MSP knob will not fit the P5 shiter. I have a 03.5 MSP knob and will not fit because the piece that hold the top of the shifter boot will not let the knob reach the treads. I have a kartboy shifter and have no problem with the knob. Just my .02
Joaquin