Mazda V6 Water Pump GP $65 shipped.

[xshellshock]

I'm just going to say where the hell are our pulleys. Why are you taking orders from the speeds if you can't even get ours out to us (mazda6 v6)? Its been long enough and you're going to have a LOT of extra pulleys on your hands soon along with having to give back a LOT of refunds if we don't see any concrete evidence that the pulleys are on their way.

 

[Medieval]

I made a post on Thursday letting everyone know I just got back in town. I work a job that sends me out of town with nothing more than a few hour notice. So my bags are packed all the time. This is a nightmare for me and this is my last week.
I got the parts and here is a picture.

I have to ream the center bore of each pulley because they are a pressed fit and was anodized. I have the reamer and will do that after work on Monday. This way it's a tight fit that will not cause any issues.

I'm not sure why you guys seem to think I'm not putting up updates. I can find them and people read them. I work a full time job right now (that was posted as well) and I have just over a week left. The V6 pulleys have been the worse nightmare possible for everyone involved. The WP pulley was made wrong and everyone got 2 pulleys with one being wrong. With me having to remake the correct one it took sometime. Those have been done and had to be anodized (posted that as well). Things like that are out of my control and at the mercy of an outside source.
These parts look great and with them being a NEW part, mistakes happen. Everyone got the wrong pulley and can see that the wrong part was made.
I can not spent 24/7 on the board and put up an update ASAP.
I'm sorry if this doesn't work for everyone. I am trying my very best to get this right and have them in your hands. I want nothing more than to see everyone running the part. With the first mistake, I will not make a second and will ream the WP and PS center bores before sending them out. I ask that everyone be patience as the parts are done and just needing the final machine to ensure problem free fit. I made these for you V6 guys to bring something new to the market.
This is my last week at my full time job and will be very busy. As I have already posted, I have so many packages going out that it will take a few days to get them all out. So, just wait and you'll see the correct WP pulley and the PS pulley on your door soon. The Post Office takes anywhere from 2-7 days. So I will start getting them out on Tuesday and will have them all out by the end of the week. Please give it the right amount of time for the Post Office to deliver it. Next weekend I will finally be able to spend more time on the forums and things like this will be a thing of the past.

 

[achow87]

brach, thank you for issuing my refund so quickly. however, you still need to address refund requests for others as well.

 

[Emmo213]

brach, you still need to address refund requests from other people that requested them.

+1. I don't want the pulleys anymore. I want my refund. As stated before, you have until the end of today before I start filing complaints with PayPal, Visa, and the Internet Crime Complaint Center. I'm posting this in all 3 threads and sending it to you in a private message. You seem to be ignoring my other requests for a refund. Maybe somehow you're not seeing them. I'll make this post redundant to make sure you see it.

 

[Killer]

Pics of all products by the end of the day.

 

[djquik1]

Guys,
After being at hooters watching the jayhawks win the NCAA tournament I am now home.I spoke with brach twice on the phone and he is getting the pullies reamed and ready.He is following his time table.He called me back the 2nd time asking if I minded posting for him since he doesn't have a pc in the shop.I myself was agitated with the situation and he is keeping in contact with me now.Please bear with this,I feel it will be worth it in the end.


Dave

 

[djquik1]

I just got off the phone with Brach again.He is finishing up the pullies tonight that have to be reamed and he will be getting them out in the mail in the next day or two.He has the V6 ones,the 2.3 ones,and the 2.0 ones and a down pipe for someone as well.He is emailing me pics for the V6 pullies tonight.Now if it is after the time I go to bed,I will post them tomorrow.



Dave

 

[Athens 6]

Sounds good. Glad to hear were gonna get these soon. All i need now is my car back with my re-built head!(doh)

 

[USAF 6S]

Thanks for being the middle man, Dave! We needed it. And again I appreciate the open line of communication that you've helped create. I now have a better feel of what's transpired thus far.

Guys let's give them a few days.... to a week for these to materialize at our door steps. I understand being pissed about the delays. I have been too! But put yourself in another mans shoes.
If you saw these pulley's from the get go as a new and exciting mod for the 6, well hang on they should almost be here. Lets not let haste get in the way of innovation. I my eyes we need all the support we can get. And as anyone can attest, s*** happens.

Brach, keep at it and I look forward to finally putting these in my engine bay.

 

[djquik1]

Email I got late last night


Dave,


It's Wed at 9:50pm and i just got home not long ago.
Here is some pictures.
I broke the reamer for the WP pulley and will have that tomorrow and finish those up. I have most of those done when that one broke. The PS are done and will be getting boxed up tomorrow.
Here is a picture of the PS pulleys.I will have to work until 5-6pm and then finish off these pulleys so I will more than likely not have time to get on the net. So if you could post these and give everyone an update and let them know they still will be out by Saturday.

 

[The Great NY]

yessir.........let go....free up a lil more power

 

[Athens 6]

Damn those look good

 

[djquik1]

I screwed up,I got this email from Brach at noon yesterday.


Dave,
Worked on the WP pulleys last night. Got most of them done. I'm exhausted and have gotten less than 3 hrs of sleep a night since last weekend. I will be boxing pulleys up today after work and start sending them out. Tomorrow is my last day here at my job and I will start posting a lot more. My new machine will be here Satruday evening so I will be hooking that up on Sunday and Monday.

 

[wannabe]

Email I got late last night


Dave,


It's Wed at 9:50pm and i just got home not long ago.
Here is some pictures.
I broke the reamer for the WP pulley and will have that tomorrow and finish those up. I have most of those done when that one broke. The PS are done and will be getting boxed up tomorrow.
Here is a picture of the PS pulleys.I will have to work until 5-6pm and then finish off these pulleys so I will more than likely not have time to get on the net. So if you could post these and give everyone an update and let them know they still will be out by Saturday.

sweet. thanks for posting that up for him.

 

[Brach]

The time has finally come. As many of you know I was working a job while trying to get my company going. Well yesterday was my last day at my job and I can’t be happier. I want to thank so many people for being patience with the delays and lack of constant communication. I never expected to get a busy as I did and the growing pains have been felt by everyone. With me being sent out of town for work, the pains this caused are deep for everyone involved.
Now that I will be doing this full time there will be major changes. Some of those changes will be communication, shipping times and product development. I hope during these next few months everyone will see the major changes.
I will also be looking for a few REPS to help with answering PM’s and to keep threads up to date. The issues from past will soon be gone and new and improved business practices will be remembered.

Lets get to business. First, the remaining Protg Crank pulley screws are in the mail. So all of those are out and you will see them this week.
I will be going through my PM’s over the next day or 2. For now on, please PM Medieval and not Brach user name. This is because Medieval is the AV and I want to follow the board rules.
The 3.5” DP will also on the way. Thank you for your patience and a free gift is with it.
The V6 WP and PS pulleys are done and are headed for the Post Office.
The 2.3L ALT pulleys are done and also headed for the Post Office. The WP pulleys will follow.
The Protg front and rear motor mounts are being pushed together and will be headed out late this week. Once I get all of these orders out I will then push forward with new products. Monday and Tuesday will be major shipping days and I will only be on here to check PM’s a few times. Wednesday I expect to be on here much more than before.
Many great things to come. Thank you for your patience.

 

[achow87]

bump for an update on shipping. has anyone received there's yet? brach, are you going to be sending the people who got refunds a prepaid envelope so they can ship the wrong pulley back to you?

 

[Emmo213]

Another question is: for those who requested refunds and you didn't give refunds to yet are you then sending the pulleys to us or have you just not gotten to the refund part yet?

 

[Medieval]

V6 guys PS pulley shipment is done. The WP pulleys are being boxed tomorrow. I could not fit the WP pulley in the box with the PS pulley and will get a small box tomorrow and start getting them off.

If you do NOT get your PS by Next Tuesday Send me a PM. They are going out USPS

 

[Medieval]

bump for an update on shipping. has anyone received there's yet? brach, are you going to be sending the people who got refunds a prepaid envelope so they can ship the wrong pulley back to you?

The pulley that was sent out is not what the right pulley for the other car either. It is off by a little and is scrap. So for everyone with the wrong pulley, please throw it in the garbage.

 

[Nealio]

The pulley that was sent out is not what the right pulley for the other car either. It is off by a little and is scrap. So for everyone with the wrong pulley, please throw it in the garbage.

EDIT: Fixed