Mazda Connect Firmware 2019 onwards only

:
ASH8
Here is updated list of Genuine Mazda Connect Firmware for current generation Mazdas, CX-30, Mazda 3, CX-60, CX-5 + CX-9 with 10.3 inch widescreen.

You can ONLY update the same region that is already in car and you update with a higher number thats already in cars CMU.
.
DO NOT USE ANOTHER MODELS FIRMWARE EVEN IF A HIGHER NUMBER...it won't let you anyway.

NORTH AMERICA NA01 or NA02 or NA03,etc
CMU_7000C0A-NA01_12002.kwi * for NON Turbo Engine. Mazda3 and CX-30 Built BEFORE July 1st 2021.
CMU_7000C0A-NA02_11036.kwi * for MX-30 Only.
CMU_7000C0A-NA03_11040.kwi * for CX-5 + CX-9 2021 on with 10.3 inch center display.
CMU_7000C0A-NA04_12002.kwi * for TURBO ENGINE Mazda3 + CX-30 TURBO Built before July 1st 2021.
CMU_7000C0A-NA05_11014.kwi * for CX-50 (VA) North America ONLY.
CMU_7000C0A-NA06_12012.kwi * for Mazda3 and CX-30 Turbo Built AFTER July 1st 2021 to present also with TCU (Telematics Communication Unit).

EUROPE and UK and Australia and NZ.
CMU_7000C0A-EU01_11000.kwi * Mazda3 and CX-30.
CMU_7000C0A-EU02_11020.kwi * MX-30 Only.
CMU_7000C0A-EU03_10028.kwi * CX-5 + CX-9 with 10.3 inch center display.
CMU_7000C0A-EU07_14004.kwi * CX-60 (KH).

GENERAL R.H.D..L.H.D Excludes Hong Kong and Macau
CMU_7000C0A-4A01_10047.kwi * Mazda3 and CX-30.

Hong Kong and Macau.
CMU_7000C0A-HK01_1****.kwi

Happy to assist those who wish to update, you must message me as urls (Links) will not be posted in these forums.

To find out what is in your car now go to screen...

Go to touchscreen 'SETTINGS',
'SYSTEM',
Down to 'ABOUT'
Then 'Version Information'.
 
Last edited:
:
ASH8
Unfortunately in so many cases Mazda Dealers never update this Firmware unless an owner reports a problem with Connect.
So this is why I offer this free service to owners, it is not hard to do but you Must follow instructions which are also supplied.

PLEASE DO NOT PUBLICLY POST ANY OF MY LINKS IN ANY FORUMS, ONLY PRIVATE MESSAGING, Thanks.
 
Last edited: