MAM FMIC Dyno results

[AZMSP]

MAM FMIC Dyno results and pics

Here is the dyno sheet from todays meet. The first run the car was stock, runs 2,3, and 4 are with the MAM FMIC.

http://www.msprotege.com/members/AZMSP/Dyno%20Run.bmp

Pictures of the installed kit:

http://www.msprotege.com/members/AZMSP/P1010039.JPG
http://www.msprotege.com/members/AZMSP/P1010040.JPG
http://www.msprotege.com/members/AZMSP/P1010041.JPG
http://www.msprotege.com/members/AZMSP/P1010042.JPG
http://www.msprotege.com/members/AZMSP/P1010043.JPG
http://www.msprotege.com/members/AZMSP/P1010044.JPG

 

[tonkabui]

is this the orange beast or the titanium? numbers are impressive.

 

[AZMSP]

This is the Tiatnium. Havent had a chance to tune the spicy yet.

 

[mspeed101]

well for a stock car I would have to say thats some good numbers. Did rich get his mam fmic installed?

 

[ricenudles]

man 135hp stock? that sucks, haha. awesome gains on the MAM fmic though.

 

[505zoom]

Haha, I'm gonna have to upload my clip of your motor rocking around. I need pull it from the camera and upload it though. Get some motor mounts already

 

[kazson]

anyone gonna have some pics of this kit with the bumper on? and some install pics? im kinda intrested..im still kinda partial to the Perrin FMIC for the punk factor lol

 

[AZMSP]

anyone gonna have some pics of this kit with the bumper on? and some install pics? im kinda intrested..im still kinda partial to the Perrin FMIC for the punk factor lol

I will have some pics of the kit installed a little later today.

 

[AZMSP]

Pics are up.

 

[FSDET]

very nice ... cant wait to install mine. i hope i gain 20whp

 

[DonSVO]

considering i made 180.1 WHP on motor and 9.25 PSI, i hope a FMIC gets me closer to 200.

i technically made 206/212 on 11 PSI, but i would start detonating after a couple runs so i backed it back down to a hair under 10.

VERY NICE gains.

 

[Bigg Tim]

So you have the emange on this car or another? Some timing and fuel control will put them numbers up where they belong.(thumb)

So what boost was that 156whp at? I would say with some control , you should get into the 160's easily.

 

[AZMSP]

So you have the emange on this car or another? Some timing and fuel control will put them numbers up where they belong.(thumb)

So what boost was that 156whp at? I would say with some control , you should get into the 160's easily.

E-manage is on the gf's car. im still reading up on the diffrent systems before i decide which one to invest in for my car. Stock PSI So far. Going to do all the supporting mods i can before touching the boost.

 

[TheJohnny]

isn't stock whp around 154 from what I've seen. I may be lost on this but I could swear i've seen numerous dynos where stock whp is around 150. Anyway, the gains are sick, congrats.

 

[jrodhotrod]

I have stock cars as high as 156whp and as low as the mid 140s. Amazing how different they can be.

But I think generally accepted amount is the low 150s.

 

[505zoom]

Here is the clip of your car Andy. Like I said man, get some motor mounts pronto.

http://www.msprotege.com/members/505zoom/MAM-Reflex_MSP_hi.mov

 

[peepsalot]

I noticed the dyno image is a bit of a download.

How about a dyno graph image that is 50x smaller without sacrificing any image quality

 

[AZMSP]

I noticed the dyno image is a bit of a download.

How about a dyno graph image that is 50x smaller without sacrificing any image quality

Thanks man, i'm not good with computers(uhm) .

Here is the clip of your car Andy. Like I said man, get some motor mounts pronto.

haha, moved so much it looks like something broke(rofl)

 

[jeffmsp]

do you have a boost gauge? If so what kind of psi increase did you notice?

 

[AZMSP]

do you have a boost gauge? If so what kind of psi increase did you notice?

Car spikes at 7 and is steady at 6, before the FMIC it never spiked and only went to 5.