will6946 Member : 2003.5 mazdaspeed protege Dec 7, 2009 #1 hearing a noise feels like exhaust moves around.. any ideas? anyone
P protege321 Member : 02 Protege DX Dec 7, 2009 #2 did you replace the hangers? could be hitting the heat shield..
D disturbedfan121 Member : 2003 Spicy Orange MSP, boosted Miata dead and parted Dec 7, 2009 #3 could be the hangars are messed up
Z zoom 79gc Member : 2003 mazdaspeed protege Dec 7, 2009 #4 exhaust hangers +3 check them out exhaust is moving around !!!!!
P protege321 Member : 02 Protege DX Dec 7, 2009 #7 i dont think you want the exhuast moving aruond to much. is it a rattle or a clunk.
Z zoom 79gc Member : 2003 mazdaspeed protege Dec 7, 2009 #8 just going to bang around on the frame and body. should not damage anything as long as it is not really loose.
just going to bang around on the frame and body. should not damage anything as long as it is not really loose.
will6946 Member : 2003.5 mazdaspeed protege Dec 7, 2009 #11 also i was tryin to put the silencer back in and its really tight.. i dont wanna damage it any suggestions?
also i was tryin to put the silencer back in and its really tight.. i dont wanna damage it any suggestions?
will6946 Member : 2003.5 mazdaspeed protege Dec 7, 2009 #12 yes i used my old hangers should i get new ones?? poly ones?
Z zoom 79gc Member : 2003 mazdaspeed protege Dec 7, 2009 #14 yes your old hangers are your problem !!!!! replace them with some good poly units like corksport, kartboy etc.
yes your old hangers are your problem !!!!! replace them with some good poly units like corksport, kartboy etc.
Z zoom 79gc Member : 2003 mazdaspeed protege Dec 7, 2009 #17 so you are talking about silencer, that goes in the from the tip right!
Z zoom 79gc Member : 2003 mazdaspeed protege Dec 7, 2009 #18 no problem man, just got the same exhaust for my msp and have been doing a lot of research on it
T theEZV Member : 2003.5 MSP --> 2013 WRX --> 2014 335i --> 2022 IS500 Dec 7, 2009 #19 my apexR1/greddy combo banged around all the time. i relaced the stock hangers with the corksport ones, very little rattling after that. good luck
my apexR1/greddy combo banged around all the time. i relaced the stock hangers with the corksport ones, very little rattling after that. good luck
T tweakingmsp Member : 2003.5 MazdaSPEED Protege Dec 7, 2009 #20 Def get the corksport hangers. Thats what I have for my vibrant and I have no problems at all.