installed Walbro, now bogging

WeldingHank

Member
:
1989 Ford Probe GT
yes, i recently installed a walbro 255 fuel pump into the Probe. now when i get on the boost, all she does is bog and backfire. sounds like a DSM when they run a 2-step. pops and hesitates under boost. am i over running my FPR or is it something else?
 
Last edited:
WeldingHank -

The higher flowing fuel pump has increased your base fuel pressure.

Do you have an adjustable fuel pressure regulator and a fuel pressure gauge?

If so, put your base fuel pressure back to what it was before the new pump was installed.

If not, buy and install them, then do the above.

Hope this helps.

-Shawn
 
A/F guage goes blank when its happening. seems i missed a small plastic spacer from the old pump assembly. gonna take it out and do it again. thank you mazda for an access door in the rear seat!!
 
I take it you got the Miata one, but I see two ont here. The 255lph-HP (part #GSS342) and the 255 lph (GSS317).

What's the difference?
 
Scroll down to the bottom, you will see just the pumps by theirselves for $100 free shhipping. Just order the GSS342.
 
Back